Re: [PATCH] sh_eth: Add R7S9210 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/22/2018 11:57 PM, Chris Brandt wrote:

> Add support for the R7S9210 which is part of the RZ/A2 series.

   Is the manual publicly available? I tried to find it on Renesas' website
but it appears royally broken...

> Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/net/sh_eth.txt |   1 +
>  drivers/net/ethernet/renesas/sh_eth.c            | 107 +++++++++++++++++++++++
>  drivers/net/ethernet/renesas/sh_eth.h            |   1 +
>  3 files changed, 109 insertions(+)
> 
[...]
> diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
> index 5573199c4536..f3a575e56ae4 100644
> --- a/drivers/net/ethernet/renesas/sh_eth.c
> +++ b/drivers/net/ethernet/renesas/sh_eth.c
> @@ -216,6 +216,59 @@ static const u16 sh_eth_offset_fast_rz[SH_ETH_MAX_REGISTER_OFFSET] = {
>  	[RXALCR0]	= 0x008C,
>  };
>  
> +static const u16 sh_eth_offset_fast_rza2[SH_ETH_MAX_REGISTER_OFFSET] = {
> +	SH_ETH_OFFSET_DEFAULTS,
> +
> +	[EDMR]		= 0x0000,
> +	[EDTRR]		= 0x0008,
> +	[EDRRR]		= 0x0010,
> +	[EESR]		= 0x0028,
> +	[EESIPR]	= 0x0030,
> +	[TDLAR]		= 0x0018,
> +	[TBRAR]		= 0x00d4,
> +	[TDFAR]		= 0x00d8,
> +	[RDLAR]		= 0x0020,
> +	[RBWAR]		= 0x00c8,
> +	[RDFAR]		= 0x00cc,
> +	[TRSCER]	= 0x0038,
> +	[RMFCR]		= 0x0040,
> +	[TFTR]		= 0x0048,
> +	[FDR]		= 0x0050,
> +	[RMCR]		= 0x0058,
> +	[TFUCR]		= 0x0064,
> +	[RFOCR]		= 0x0068,
> +	[RPADIR]	= 0x0078,
> +	[TRIMD]		= 0x007c,
> +	[FCFTR]		= 0x0070,
> +
> +	[ECMR]		= 0x0100,
> +	[RFLR]		= 0x0108,
> +	[ECSR]		= 0x0110,
> +	[ECSIPR]	= 0x0118,
> +	[PIR]		= 0x0120,
> +	[PSR]		= 0x0128,
> +	[RDMLR]		= 0x0140,
> +	[IPGR]		= 0x0150,
> +	[APR]		= 0x0154,
> +	[MPR]		= 0x0158,
> +	[RFCF]		= 0x0160,
> +	[TPAUSER]	= 0x0164,
> +	[TPAUSECR]	= 0x0168,
> +	[BCFRR]		= 0x016c,
> +	[MAHR]		= 0x01c0,
> +	[MALR]		= 0x01c8,
> +	[TROCR]		= 0x01d0,
> +	[CDCR]		= 0x01d4,
> +	[LCCR]		= 0x01d8,
> +	[CNDCR]		= 0x01dc,
> +	[CEFCR]		= 0x01e4,
> +	[FRECR]		= 0x01e8,
> +	[TSFRCR]	= 0x01ec,
> +	[TLFRCR]	= 0x01f0,
> +	[RFCR]		= 0x01f4,
> +	[MAFCR]		= 0x01f8,
> +};
> +

   This array is absolutely the same as sh_eth_offset_fast_sh4[], except the latter
is (more or less) sorted.

>  static const u16 sh_eth_offset_fast_rcar[SH_ETH_MAX_REGISTER_OFFSET] = {
>  	SH_ETH_OFFSET_DEFAULTS,
>  
> @@ -635,6 +688,56 @@ static struct sh_eth_cpu_data r7s72100_data = {
>  	.no_tx_cntrs	= 1,
>  };
>  
> +/* R7S9210 */
> +static void sh_eth_set_rate_r7s9210(struct net_device *ndev)
> +{
> +	struct sh_eth_private *mdp = netdev_priv(ndev);
> +	unsigned long RTM = 0x00000004;

  Use #define, please.

> +
> +	switch (mdp->speed) {
> +	case 10: /* 10BASE */
> +		sh_eth_modify(ndev, ECMR, RTM, 0);
> +		break;
> +	case 100:/* 100BASE */
> +		sh_eth_modify(ndev, ECMR, RTM, RTM);
> +		break;
> +	}
> +}
> +

  Seems the same as sh_eth_set_rate_rcar(), except for the bit name...

> +static struct sh_eth_cpu_data r7s9210_data = {
> +	.soft_reset	= sh_eth_soft_reset,
> +
> +	.set_duplex	= sh_eth_set_duplex,
> +	.set_rate	= sh_eth_set_rate_r7s9210,
> +
> +	.register_type	= SH_ETH_REG_FAST_RZA2,
> +
> +	.edtrr_trns	= EDTRR_TRNS_ETHER,
> +	.ecsr_value	= ECSR_ICD,
> +	.ecsipr_value	= ECSIPR_ICDIP,
> +	.eesipr_value	= EESIPR_TWBIP | EESIPR_TABTIP | EESIPR_RABTIP |
> +			  EESIPR_RFCOFIP | EESIPR_ECIIP | EESIPR_FTCIP |
> +			  EESIPR_TDEIP | EESIPR_TFUFIP | EESIPR_FRIP |
> +			  EESIPR_RDEIP | EESIPR_RFOFIP | EESIPR_CNDIP |
> +			  EESIPR_DLCIP | EESIPR_CDIP | EESIPR_TROIP |
> +			  EESIPR_RMAFIP | EESIPR_RRFIP | EESIPR_RTLFIP |
> +			  EESIPR_RTSFIP | EESIPR_PREIP | EESIPR_CERFIP,
> +
> +	.tx_check	= EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_TRO,
> +	.eesr_err_check	= EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE |
> +			  EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE,
> +
> +	.fdr_value	= 0x0000070f,
> +
> +	.apr		= 1,
> +	.mpr		= 1,
> +	.tpauser	= 1,
> +	.hw_swap	= 1,
> +	.rpadir		= 1,
> +	.no_ade		= 1,
> +	.xdfar_rw	= 1,
> +};
> +

   Can't check these w/o the manual...

>  static void sh_eth_chip_reset_r8a7740(struct net_device *ndev)
>  {
>  	sh_eth_chip_reset(ndev);
[...]

MNR, Sergei



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux