From: Jacopo Mondi <jacopo@xxxxxxxxxx>
The "EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation" is based on the 1.5 version
of the i.Core MX6 cpu module. The 1.5 version differs from the original one for
a few details, including the ethernet PHY interface clock provider.
With this commit, the ethernet interface works properly:
SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver
While before using the 1.5 version, ethernet failed to startup do to un-clocked
PHY interface:
fec 2188000.ethernet eth0: could not attach to PHY
Fixes: 3fe088357731 ("ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support")
Reviewed-by: Fabio Estevam <fabio.estevam@xxxxxxx>
Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
---
arch/arm/boot/dts/imx6q-icore-mipi.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
index 95b2efd..1f15882 100644
--- a/arch/arm/boot/dts/imx6q-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -8,10 +8,10 @@
/dts-v1/;
#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
/ {
- model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit";
+ model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit";
compatible = "engicam,imx6-icore", "fsl,imx6q";
};
--
2.7.4
