On Fri, Feb 28, 2014 at 07:06:29PM -0800, S?ren Brinkmann wrote: > On Fri, 2014-02-28 at 04:00PM -0800, Soren Brinkmann wrote: > > Add a driver for the Cadence I2C controller. This controller is for > > example found in Xilinx Zynq. > > > > Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx> > > --- > > .../devicetree/bindings/i2c/i2c-cadence.txt | 21 + > > MAINTAINERS | 1 + > > drivers/i2c/busses/Kconfig | 7 + > > drivers/i2c/busses/Makefile | 1 + > > drivers/i2c/busses/i2c-cadence.c | 901 +++++++++++++++++++++ > > 5 files changed, 931 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-cadence.txt > > create mode 100644 drivers/i2c/busses/i2c-cadence.c > > > [...] > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > > index f5ed03164d86..7806c1654068 100644 > > --- a/drivers/i2c/busses/Kconfig > > +++ b/drivers/i2c/busses/Kconfig > > @@ -375,6 +375,13 @@ config I2C_BLACKFIN_TWI_CLK_KHZ > > help > > The unit of the TWI clock is kHz. > > > > +config I2C_CADENCE > > + tristate "Cadence I2C Controller" > > + depends on ARCH_ZYNQ > This can be reduced to a dependency on COMMON_CLK only, I think. Do you really need to depend on COMMON_CLK? Most of the clk_* API's are properly stubbed when !HAVE_CLK. Also, you may want to split out the device tree bindings in a separate patch for separate review. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
