On Fri, 2014-02-28 at 04:00PM -0800, Soren Brinkmann wrote: > Add a driver for the Cadence I2C controller. This controller is for > example found in Xilinx Zynq. > > Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx> > --- > .../devicetree/bindings/i2c/i2c-cadence.txt | 21 + > MAINTAINERS | 1 + > drivers/i2c/busses/Kconfig | 7 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-cadence.c | 901 +++++++++++++++++++++ > 5 files changed, 931 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-cadence.txt > create mode 100644 drivers/i2c/busses/i2c-cadence.c > [...] > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index f5ed03164d86..7806c1654068 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -375,6 +375,13 @@ config I2C_BLACKFIN_TWI_CLK_KHZ > help > The unit of the TWI clock is kHz. > > +config I2C_CADENCE > + tristate "Cadence I2C Controller" > + depends on ARCH_ZYNQ This can be reduced to a dependency on COMMON_CLK only, I think. Sören -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
