On Wed, Aug 1, 2018 at 3:43 PM, Akash Gajjar <Akash_Gajjar@xxxxxxxxxx> wrote: > sopine board has a csi. enable supply dvdd-1v8-csi, dovdd-2v8-csi and > avdd-2v8-csi on board to access external camera connected to it. Unless there are other uses beyond supplying the camera module, this is not going to be accepted. Enabling power to the camera should be in the same patch as enabling the camera itself. And since it is a module, it should be an overlay file. ChenYu > Signed-off-by: Akash Gajjar <Akash_Gajjar@xxxxxxxxxx> > --- > .../arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi > index 43418bd..256229b 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi > @@ -68,6 +68,13 @@ > > #include "axp803.dtsi" > > +®_aldo1 { > + regulator-always-on; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-name = "dovdd-csi"; > +}; > + > ®_aldo2 { > regulator-always-on; > regulator-min-microvolt = <1800000>; > @@ -112,6 +119,13 @@ > regulator-name = "vdd-sys"; > }; > > +®_dldo3 { > + regulator-always-on; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-name = "avdd-csi"; > +}; > + > ®_eldo1 { > regulator-always-on; > regulator-min-microvolt = <1800000>; > @@ -119,6 +133,13 @@ > regulator-name = "vdd-1v8-lpddr"; > }; > > +®_eldo3 { > + regulator-always-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vdd-csi"; > +}; > + > ®_fldo1 { > regulator-min-microvolt = <1200000>; > regulator-max-microvolt = <1200000>; > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html