On Fri, 3 Aug 2018 16:02:18 +0300
Stefan Popa <stefan.popa@xxxxxxxxxx> wrote:
> From: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
>
> The regmap API usually assumes that bulk read operations will read a
> range of registers but some I2C/SPI devices have certain registers for
> which a such a read operation will return data from an internal FIFO
> instead. Add an explicit API to support bulk read without range semantics.
>
> Some linux drivers use regmap_bulk_read or regmap_raw_read for such
> registers, for example mpu6050 or bmi150 from IIO. This only happens to
> work because when caching is disabled a single regmap read op will map
> to a single bus read op (as desired). This breaks if caching is enabled and
> reg+1 happens to be a cacheable register.
>
> Without regmap support refactoring a driver to enable regmap caching
> requires separate I2C and SPI paths. This is exactly what regmap is
> supposed to help avoid.
>
> Suggested-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> Signed-off-by: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
> Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx>
I always liked this so am very pleased you have picked it up - so
if Mark want's to squeeze it in directly then I'm happy for him to do so.
If not, hopefully he's happy for this got via IIO next cycle?
Reviewed-by: Jonathan Cameron <jic23@xxxxxxxxxx>
When this is applied we'll have to remember to clear up the odd cases
you hightlight above as well.
> ---
> drivers/base/regmap/regmap.c | 65 +++++++++++++++++++++++++++++++++++++++++++-
> include/linux/regmap.h | 9 ++++++
> 2 files changed, 73 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
> index 3bc8488..e632503 100644
> --- a/drivers/base/regmap/regmap.c
> +++ b/drivers/base/regmap/regmap.c
> @@ -2564,7 +2564,70 @@ int regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
> EXPORT_SYMBOL_GPL(regmap_raw_read);
>
> /**
> - * regmap_field_read() - Read a value to a single register field
> + * regmap_noinc_read(): Read data from a register without incrementing the
> + * register number
> + *
> + * @map: Register map to read from
> + * @reg: Register to read from
> + * @val: Pointer to data buffer
> + * @val_len: Length of output buffer in bytes.
> + *
> + * The regmap API usually assumes that bulk bus read operations will read a
> + * range of registers. Some devices have certain registers for which a read
> + * operation read will read from an internal FIFO.
> + *
> + * The target register must be volatile but registers after it can be
> + * completely unrelated cacheable registers.
> + *
> + * This will attempt multiple reads as required to read val_len bytes.
> + *
> + * A value of zero will be returned on success, a negative errno will be
> + * returned in error cases.
> + */
> +int regmap_noinc_read(struct regmap *map, unsigned int reg,
> + void *val, size_t val_len)
> +{
> + size_t read_len;
> + int ret;
> +
> + if (!map->bus)
> + return -EINVAL;
> + if (!map->bus->read)
> + return -ENOTSUPP;
> + if (val_len % map->format.val_bytes)
> + return -EINVAL;
> + if (!IS_ALIGNED(reg, map->reg_stride))
> + return -EINVAL;
> + if (val_len == 0)
> + return -EINVAL;
> +
> + map->lock(map->lock_arg);
> +
> + if (!regmap_volatile(map, reg) || !regmap_readable(map, reg)) {
> + ret = -EINVAL;
> + goto out_unlock;
> + }
> +
> + while (val_len) {
> + if (map->max_raw_read && map->max_raw_read < val_len)
> + read_len = map->max_raw_read;
> + else
> + read_len = val_len;
> + ret = _regmap_raw_read(map, reg, val, read_len);
> + if (ret)
> + goto out_unlock;
> + val = ((u8 *)val) + read_len;
> + val_len -= read_len;
> + }
> +
> +out_unlock:
> + map->unlock(map->lock_arg);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(regmap_noinc_read);
> +
> +/**
> + * regmap_field_read(): Read a value to a single register field
> *
> * @field: Register field to read from
> * @val: Pointer to store read value
> diff --git a/include/linux/regmap.h b/include/linux/regmap.h
> index 4f38068..b6e6040 100644
> --- a/include/linux/regmap.h
> +++ b/include/linux/regmap.h
> @@ -946,6 +946,8 @@ int regmap_raw_write_async(struct regmap *map, unsigned int reg,
> int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val);
> int regmap_raw_read(struct regmap *map, unsigned int reg,
> void *val, size_t val_len);
> +int regmap_noinc_read(struct regmap *map, unsigned int reg,
> + void *val, size_t val_len);
> int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val,
> size_t val_count);
> int regmap_update_bits_base(struct regmap *map, unsigned int reg,
> @@ -1196,6 +1198,13 @@ static inline int regmap_raw_read(struct regmap *map, unsigned int reg,
> return -EINVAL;
> }
>
> +static inline int regmap_pipe_read(struct regmap *map, unsigned int reg,
> + void *val, size_t val_len)
> +{
> + WARN_ONCE(1, "regmap API is disabled");
> + return -EINVAL;
> +}
> +
> static inline int regmap_bulk_read(struct regmap *map, unsigned int reg,
> void *val, size_t val_count)
> {
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
