On Fri, 3 Aug 2018 16:02:17 +0300 Stefan Popa <stefan.popa@xxxxxxxxxx> wrote: > Add the device tree binding documentation for the ADXL372 3-axis digital > accelerometer. > > Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx> > --- > .../devicetree/bindings/iio/accel/adxl372.txt | 24 ++++++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/adxl372.txt > > diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt > new file mode 100644 > index 0000000..41493d9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/accel/adxl372.txt > @@ -0,0 +1,24 @@ > +Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer > + > +http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf > + > +Required properties: > + - compatible : should be "adi,adxl372" > + - reg: SPI chip select number for the device > + - spi-max-frequency: Max SPI frequency to use > + > +Optional properties: > + - interrupt-parent : phandle to the parent interrupt controller as documented > + in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt General convention, IIRC, is to not bother adding interrupt-parent as it is clear from the reference you give for interrupts. > + - interrupts: interrupt mapping for IRQ as documented in > + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > + > +Example: > + > + accelerometer@0 { > + compatible = "adi,adxl372"; > + reg = <0>; > + spi-max-frequency = <1000000>; > + interrupt-parent = <&gpio>; > + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index 2ba47bb..c8dd09c 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -548,6 +548,7 @@ M: Stefan Popa <stefan.popa@xxxxxxxxxx> > W: http://ez.analog.com/community/linux-device-drivers > S: Supported > F: drivers/iio/accel/adxl372.c > +F: Documentation/devicetree/bindings/iio/accel/adxl372.txt > > AF9013 MEDIA DRIVER > M: Antti Palosaari <crope@xxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
