The patch ASoC: dt-bindings: add dt bindings for wcd9335 audio codec has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 1877c9fda1b7ba2ee2d9b108b9c9298e69b5b488 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> Date: Fri, 27 Jul 2018 13:17:57 +0100 Subject: [PATCH] ASoC: dt-bindings: add dt bindings for wcd9335 audio codec This patch adds bindings for wcd9335 audio codec which can support both SLIMbus and I2S/I2C interface. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- .../bindings/sound/qcom,wcd9335.txt | 123 ++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd9335.txt diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt new file mode 100644 index 000000000000..1d8d49e30af7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt @@ -0,0 +1,123 @@ +QCOM WCD9335 Codec + +Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports +Qualcomm Technologies, Inc. (QTI) multimedia solutions, including +the MSM8996, MSM8976, and MSM8956 chipsets. It has in-built +Soundwire controller, interrupt mux. It supports both I2S/I2C and +SLIMbus audio interfaces. + +Required properties with SLIMbus Interface: + +- compatible: + Usage: required + Value type: <stringlist> + Definition: For SLIMbus interface it should be "slimMID,PID", + textual representation of Manufacturer ID, Product Code, + shall be in lower case hexadecimal with leading zeroes + suppressed. Refer to slimbus/bus.txt for details. + Should be: + "slim217,1a0" for MSM8996 and APQ8096 SoCs with SLIMbus. + +- reg + Usage: required + Value type: <u32 u32> + Definition: Should be ('Device index', 'Instance ID') + +- interrupts + Usage: required + Value type: <prop-encoded-array> + Definition: Interrupts via WCD INTR1 and INTR2 pins + +- interrupt-names: + Usage: required + Value type: <String array> + Definition: Interrupt names of WCD INTR1 and INTR2 + Should be: "intr1", "intr2" + +- reset-gpio: + Usage: required + Value type: <String Array> + Definition: Reset gpio line + +- qcom,ifd: + Usage: required + Value type: <phandle> + Definition: SLIM interface device + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: See clock-bindings.txt section "consumers". List of + three clock specifiers for mclk, mclk2 and slimbus clock. + +- clock-names: + Usage: required + Value type: <string> + Definition: Must contain "mclk", "mclk2" and "slimbus" strings. + +- vdd-buck-supply: + Usage: required + Value type: <phandle> + Definition: Should contain a reference to the 1.8V buck supply + +- vdd-buck-sido-supply: + Usage: required + Value type: <phandle> + Definition: Should contain a reference to the 1.8V SIDO buck supply + +- vdd-rx-supply: + Usage: required + Value type: <phandle> + Definition: Should contain a reference to the 1.8V rx supply + +- vdd-tx-supply: + Usage: required + Value type: <phandle> + Definition: Should contain a reference to the 1.8V tx supply + +- vdd-vbat-supply: + Usage: Optional + Value type: <phandle> + Definition: Should contain a reference to the vbat supply + +- vdd-micbias-supply: + Usage: required + Value type: <phandle> + Definition: Should contain a reference to the micbias supply + +- vdd-io-supply: + Usage: required + Value type: <phandle> + Definition: Should contain a reference to the 1.8V io supply + +- interrupt-controller: + Usage: required + Definition: Indicating that this is a interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <int> + Definition: should be 1 + +#sound-dai-cells + Usage: required + Value type: <u32> + Definition: Must be 1 + +codec@1{ + compatible = "slim217,1a0"; + reg = <1 0>; + interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr2" + reset-gpio = <&msmgpio 64 0>; + qcom,ifd = <&wc9335_ifd>; + clock-names = "mclk", "native"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>, + <&rpmcc RPM_SMD_BB_CLK1>; + vdd-buck-supply = <&pm8994_s4>; + vdd-rx-supply = <&pm8994_s4>; + vdd-buck-sido-supply = <&pm8994_s4>; + vdd-tx-supply = <&pm8994_s4>; + vdd-io-supply = <&pm8994_s4>; + #sound-dai-cells = <1>; +} -- 2.18.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
