Re: [PATCH 7/9] irqchip: add a RISC-V PLIC driver

[Atish Patra <atish.patra@xxxxxxx>]

On 7/31/18 9:52 AM, Christoph Hellwig wrote:
> On Mon, Jul 30, 2018 at 08:21:33PM -0700, Atish Patra wrote:
> > I found the issue. As per PLIC documentation, a hart context is a given
> > privilege mode on a given hart. Thus, cpu context ID & cpu numbers are not
> > same. Here is the PLIC register Maps in U54 core:
> >
> > Ref: https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf
> >
> > Memory address for Interrupt enable
> > Address
> > 0x0C00-2080   Hart 1 M-mode enables
> > 0x0C00 2094   End of Hart 1 M-mode enables
> >
> > 0x0C00-2100   Hart 1 S-mode enables
> > 0x0C00-2114   End of Hart 1 S-mode enables
> >
> > Memory map Claim/Threshold
> > Address
> > 0x0C20-1000 4B 	 M-mode priority threshold
> > 0x0C20-1004 4B   M-mode claim/complete
> > 0x0C20-2000 4B   S-mode priority threshold
> > 0x0C20-2004 4B   S-mode claim/complete
> >
> > The original PLIC patch was calculating based on handle->contextid which
> > will assume numbers on a HighFive Unleashed board as 2 4 6 8.
> >
> > In this patch, context id is assigned as cpu numbers which will be 1 2 3 4.
> > Thus it will lead to incorrect plic address access as shown below.
>
> Indeed.  Can you try this branch, which puts back the OF contextid
> parsing from the original code:
>
>     git://git.infradead.org/users/hch/riscv.git riscv-irq-simple.2
>
> Gitweb:
>
>     http://git.infradead.org/users/hch/riscv.git/shortlog/refs/heads/riscv-irq-simple.2

Some typos in the above repo in the PLIC driver patch. The following 
changes are required. Inline patch below

diff --git a/drivers/irqchip/irq-riscv-plic.c 
b/drivers/irqchip/irq-riscv-plic.c
index 0e524e3e..9dbaca47 100644
--- a/drivers/irqchip/irq-riscv-plic.c
+++ b/drivers/irqchip/irq-riscv-plic.c
@@ -79,7 +79,7 @@ static DEFINE_SPINLOCK(plic_toggle_lock);
 static inline void plic_toggle(int ctxid, int hwirq, int enable)
 {
        u32 __iomem *reg = plic_regs + ENABLE_BASE +
-               ctxid * ENABLE_PER_HART + (hwirq / 32);
+               ctxid * ENABLE_PER_HART + (hwirq / 32) * 4;
        u32 hwirq_mask = 1 << (hwirq % 32);

        spin_lock(&plic_toggle_lock);
@@ -166,7 +166,7 @@ static void plic_handle_irq(struct pt_regs *regs)
 static int __init plic_init(struct device_node *node,
                struct device_node *parent)
 {
-       int error = 0, nr_mapped = 0, cpu, i;
+       int error = 0, nr_mapped = 0, i;
        u32 nr_irqs;

        if (plic_regs) {
@@ -211,8 +211,7 @@ static int __init plic_init(struct device_node *node,
                        pr_err("invalid OF parent, skipping context 
%d.\n", i);
                        continue;
                }
-
-               if (riscv_of_processor_hart(parent.np->parent < 0))
+               if (riscv_of_processor_hart(parent.np->parent) < 0)
                        continue;

                plic_handler_present[i] = true;


With the above changes, I am able to boot quite far. But it still 
crashes which may be a driver issue. I might have missed something while 
merging all the out-of-tree drivers from riscv-all branch.

Here is my git repo.
https://github.com/atishp04/riscv-linux/tree/master_chris_cleanup_v4

crash details are at
https://paste.debian.net/1036078/

Regards,
Atish
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html