On Mon, Jul 23, 2018 at 04:46:50PM +0300, Sakari Ailus wrote: > Allow specifying the bus type explicitly for MIPI D-PHY, parallel and > Bt.656 busses. This is useful for devices that can make use of different > bus types. There are CSI-2 transmitters and receivers but the PHY > selection needs to be made between C-PHY and D-PHY; many devices also > support parallel and Bt.656 interfaces but the means to pass that > information to software wasn't there. > > Autodetection (value 0) is removed as an option as the property could be > simply omitted in that case. Presumably there are users, so you can't remove it. But documenting behavior when absent would be good. > > Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/media/video-interfaces.txt | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt > index baf9d9756b3c..f884ada0bffc 100644 > --- a/Documentation/devicetree/bindings/media/video-interfaces.txt > +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt > @@ -100,10 +100,12 @@ Optional endpoint properties > slave device (data source) by the master device (data sink). In the master > mode the data source device is also the source of the synchronization signals. > - bus-type: data bus type. Possible values are: > - 0 - autodetect based on other properties (MIPI CSI-2 D-PHY, parallel or Bt656) > 1 - MIPI CSI-2 C-PHY > 2 - MIPI CSI1 > 3 - CCP2 > + 4 - MIPI CSI-2 D-PHY > + 5 - Parallel Is that really specific enough to be useful? > + 6 - Bt.656 > - bus-width: number of data lines actively used, valid for the parallel busses. > - data-shift: on the parallel data busses, if bus-width is used to specify the > number of data lines, data-shift can be used to specify which data lines are > -- > 2.11.0 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
