Em Thu, 28 Jun 2018 18:20:51 +0200
Marco Felsch <m.felsch@xxxxxxxxxxxxxx> escreveu:
> The currrent driver layout had the following layout:
> +----------------+
> +-------+ | TVP5150 |
> | Comp0 +--+ | |
> +-------+ | | +-----+
> +-------+ | +------+ | Src |
> | Comp1 +--+--|Sink | +-----+
> +-------+ | +------+ +-----+
> +--------+ | | | Src |
> | SVideo +--+ | +-----+
> +--------+ +----------------+
>
> Since the device tree abstracts the real hardware this layout is not
> correct, because the TVP5150 has 3 physical ports (2 input, 1 output).
> Furthermore this layout assumes that there is an additional external mux
> in front of the TVP5150. This is not correct because the TVP5150 does
> the muxing work. The corresponding of_graph layout will look like:
> tvp5150 {
> ....
> port {
> reg = <0>;
> endpoint@0 {...};
> endpoint@1 {...};
> endpoint@2 {...};
> };
>
> };
>
> This patch change the layout to:
> +----------------+
> | TVP5150 |
> +-------+ +------+ |
> | Comp0 +---+ Sink | |
> +-------+ +------+ |
> +-------+ +------+ +-----+
> | Comp1 +---+ Sink | | Src |
> +-------+ +------+ +-----+
> +--------+ +------+ |
> | SVideo +---+ Sink | |
> +--------+ +------+ |
> +----------------+
>
> To keep things easy an additional 'virtual' S-Video port is added. More
> information about the port mapping can be found in the device tree
> binding documentation. The connector entities Comp0/1, SVideo are created
> only if they are connected to the correct port. If more than one connector
> is available the media_entity_operations.link_setup() callback ensures that
> only one connector is active. To change the input src the link between
> the TVP5150 pad and the connector must be disabled, then a new link can
> be enabled.
>
> The patch tries to reduce the '#ifdef CONFIG_MEDIA_CONTROLLER' usage to
> a minimum.
>
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/tvp5150.c | 322 ++++++++++++++++++++++++++++++++----
> 1 file changed, 287 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> index a6fec569a610..6ac29c62d99b 100644
> --- a/drivers/media/i2c/tvp5150.c
> +++ b/drivers/media/i2c/tvp5150.c
> @@ -44,10 +44,30 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)");
>
> #define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)
>
> +enum tvp5150_ports {
> + TVP5150_PORT_AIP1A = TVP5150_COMPOSITE0,
> + TVP5150_PORT_AIP1B,
> + /* s-video port is a virtual port */
> + TVP5150_PORT_SVIDEO,
> + TVP5150_PORT_YOUT,
> + TVP5150_PORT_NUM,
> +};
> +
> +#ifdef CONFIG_MEDIA_CONTROLLER
> +struct tvp5150_connector {
> + struct media_entity con;
> + struct media_pad pad;
> + unsigned int port_num;
> +};
> +#endif
> +
> struct tvp5150 {
> struct v4l2_subdev sd;
> + struct device_node *endpoints[TVP5150_PORT_NUM];
> #ifdef CONFIG_MEDIA_CONTROLLER
> - struct media_pad pads[DEMOD_NUM_PADS];
> + struct media_pad pads[TVP5150_PORT_NUM];
This will cause problems with the current code.
When we designed the MC version 2 code, the idea were to allow
set properties to entities and to the inputs, but the code
was never submitted upstream.
A decoder may have several different types of inputs and outputs.
Several designs allow using different types of decoders, being
saa711x and tvp5150 the most popular ones. Well, depending on
the device, the number of PADs and the signals they carry can
be different.
Without a way to "taint" a pad to the signal it contains,
while waiting for the properties API, we added a code that
"fixed" the PADs to a certain number. This way, Kernelspace could
use the pad "number" as a way to identify the type of signal a
PAD carries.
The PC consumer drivers use those numbers in order to build the
MC graph[1].
A change on this would require adding a property to the pad, in
order to indicate the type of signal it provides (RF, luminance IF,
chroma IF, audio IF, I2S audio, ...), and to change
v4l2_mc_create_media_graph() accordingly.
[1] See drivers/media/v4l2-core/v4l2-mc.c at v4l2_mc_create_media_graph() func.
> + struct tvp5150_connector *connectors;
> + int active;
> #endif
> struct v4l2_ctrl_handler hdl;
> struct v4l2_rect rect;
> @@ -990,7 +1010,7 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
> struct v4l2_rect *__crop;
> struct tvp5150 *decoder = to_tvp5150(sd);
>
> - if (!format || (format->pad != DEMOD_PAD_VID_OUT))
> + if (!format || (format->pad != TVP5150_PORT_YOUT))
> return -EINVAL;
>
> f = &format->format;
> @@ -1189,6 +1209,62 @@ static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
> return 0;
> }
>
> +/****************************************************************************
> + * Media entity ops
> + ****************************************************************************/
> +#ifdef CONFIG_MEDIA_CONTROLLER
> +static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
> + u32 config);
> +static int tvp5150_link_setup(struct media_entity *entity,
> + const struct media_pad *local,
> + const struct media_pad *remote, u32 flags)
> +{
> + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> + struct tvp5150 *decoder = to_tvp5150(sd);
> + int ret = 0;
> +
> + /*
> + * The tvp state is determined by the enabled sink pad link.
> + * Enabling or disabling the source pad link has no effect.
> + */
> + if (local->flags & MEDIA_PAD_FL_SOURCE)
> + return 0;
> +
> + dev_dbg(sd->dev, "link setup '%s':%d->'%s':%d[%d]",
> + remote->entity->name, remote->index, local->entity->name,
> + local->index, flags & MEDIA_LNK_FL_ENABLED);
> +
> + if (flags & MEDIA_LNK_FL_ENABLED) {
> + if (decoder->active == local->index)
> + goto out;
> + if (decoder->active >= 0) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + dev_dbg(sd->dev, "Setting %d active\n", local->index);
> + decoder->active = local->index;
> + tvp5150_s_routing(sd, local->index, TVP5150_NORMAL, 0);
> + } else {
> + if (decoder->active != local->index)
> + goto out;
> +
> + dev_dbg(sd->dev, "going inactive\n");
> + decoder->active = -1;
> + /*
> + * Output black screen for deselected input if TVP5150 variant
> + * supports this.
> + */
> + tvp5150_s_routing(sd, local->index, TVP5150_BLACK_SCREEN, 0);
> + }
> +out:
> + return ret;
> +}
> +
> +static const struct media_entity_operations tvp5150_sd_media_ops = {
> + .link_setup = tvp5150_link_setup,
> +};
> +#endif
> /****************************************************************************
> I2C Command
> ****************************************************************************/
> @@ -1333,6 +1409,50 @@ static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
> return 0;
> }
>
> +static int tvp5150_get_con_num(struct tvp5150 *decoder)
> +{
> + unsigned int i, num = 0;
> +
> + for (i = 0; i < TVP5150_PORT_NUM - 1; i++)
> + if (decoder->endpoints[i])
> + num++;
> + return num;
> +}
> +
> +static int tvp5150_registered(struct v4l2_subdev *sd)
> +{
> +#ifdef CONFIG_MEDIA_CONTROLLER
> + struct tvp5150 *decoder = to_tvp5150(sd);
> + unsigned int i, con_num;
> + int ret;
> +
> + con_num = tvp5150_get_con_num(decoder);
> + for (i = 0; i < con_num; i++) {
> + struct media_entity *con = &decoder->connectors[i].con;
> + struct media_pad *pad = &decoder->connectors[i].pad;
> + unsigned int port = decoder->connectors[i].port_num;
> +
> + pad->flags = MEDIA_PAD_FL_SOURCE;
> + ret = media_entity_pads_init(con, 1, pad);
> + if (ret < 0)
> + return ret;
> +
> + ret = media_device_register_entity(sd->v4l2_dev->mdev, con);
> + if (ret < 0)
> + return ret;
> +
> + ret = media_create_pad_link(con, 0, &sd->entity, port, 0);
> + if (ret < 0) {
> + media_device_unregister_entity(con);
> + return ret;
> + }
> +
> + }
> +#endif
> + return 0;
> +}
> +
> +
> /* ----------------------------------------------------------------------- */
>
> static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
> @@ -1386,6 +1506,10 @@ static const struct v4l2_subdev_ops tvp5150_ops = {
> .pad = &tvp5150_pad_ops,
> };
>
> +static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
> + .registered = tvp5150_registered,
> +};
> +
> /****************************************************************************
> I2C Client & Driver
> ****************************************************************************/
> @@ -1534,38 +1658,171 @@ static int tvp5150_init(struct i2c_client *c)
> return 0;
> }
>
> +static int tvp5150_mc_init(struct v4l2_subdev *sd)
> +{
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + struct tvp5150 *decoder = to_tvp5150(sd);
> + struct device *dev = decoder->sd.dev;
> + struct device_node *rp;
> + unsigned int con_num = 0;
> + unsigned int i, j;
> + int ret;
> +
> + sd->entity.ops = &tvp5150_sd_media_ops;
> + sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
> +
> + /* Initialize all TVP5150 pads */
> + for (i = 0; i < TVP5150_PORT_NUM; i++)
> + decoder->pads[i].flags = (i < TVP5150_PORT_NUM - 1) ?
> + MEDIA_PAD_FL_SINK :
> + MEDIA_PAD_FL_SOURCE;
> + ret = media_entity_pads_init(&sd->entity, TVP5150_PORT_NUM,
> + decoder->pads);
> + if (ret < 0)
> + return ret;
> +
> + /* Allocate and initialize all available input connectors */
> + con_num = tvp5150_get_con_num(decoder);
> + if (!con_num)
> + return 0;
> + decoder->connectors = devm_kcalloc(dev, con_num,
> + sizeof(*decoder->connectors),
> + GFP_KERNEL);
> + if (!decoder->connectors)
> + return -ENOMEM;
> +
> + for (i = 0, j = 0; i < TVP5150_PORT_NUM - 1; i++) {
> + if (!decoder->endpoints[i])
> + continue;
> +
> + switch (i) {
> + case TVP5150_PORT_AIP1A:
> + case TVP5150_PORT_AIP1B:
> + decoder->connectors[j].con.function =
> + MEDIA_ENT_F_CONN_COMPOSITE;
> + break;
> + case TVP5150_PORT_SVIDEO:
> + decoder->connectors[j].con.function =
> + MEDIA_ENT_F_CONN_SVIDEO;
> + break;
> + }
> +
> + decoder->connectors[j].con.flags = MEDIA_ENT_FL_CONNECTOR;
> + rp = of_graph_get_remote_port_parent(decoder->endpoints[i]);
> + ret = of_property_read_string(rp, "label",
> + &decoder->connectors[j].con.name);
> + if (ret < 0)
> + return ret;
> + decoder->connectors[j].port_num = i;
> +
> + j++;
> + }
> +#endif
> + return 0;
> +}
> +
> +static bool tvp5150_valid_input(struct device_node *endpoint,
> + unsigned int port)
> +{
> + struct device_node *rp = of_graph_get_remote_port_parent(endpoint);
> + const char *input;
> + int ret;
> +
> + switch (port) {
> + case TVP5150_PORT_AIP1A:
> + case TVP5150_PORT_AIP1B:
> + ret = of_device_is_compatible(rp, "composite-video-connector");
> + if (!ret)
> + return false;
> + break;
> + case TVP5150_PORT_SVIDEO:
> + ret = of_device_is_compatible(rp, "svideo-connector");
> + if (!ret)
> + return false;
> + }
> +
> + ret = of_property_read_string(rp, "label", &input);
> + if (ret < 0)
> + return false;
> +
> + return true;
> +}
> +
> static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
> {
> + struct device *dev = decoder->sd.dev;
> struct v4l2_fwnode_endpoint bus_cfg;
> - struct device_node *ep;
> + struct device_node *ep_np;
> unsigned int flags;
> - int ret = 0;
> + int ret;
> + bool found = false;
>
> - ep = of_graph_get_next_endpoint(np, NULL);
> - if (!ep)
> - return -EINVAL;
> + for_each_endpoint_of_node(np, ep_np) {
> + struct of_endpoint ep;
>
> - ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
> - if (ret)
> - goto err;
> -
> - flags = bus_cfg.bus.parallel.flags;
> + of_graph_parse_endpoint(ep_np, &ep);
> + if (decoder->endpoints[ep.port]) {
> + dev_warn(dev,
> + "Multiple port endpoints are not supported\n");
> + continue;
> + }
>
> - if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
> - !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
> - flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
> - flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
> - ret = -EINVAL;
> - goto err;
> - }
> + switch (ep.port) {
> + /* Use common tvp5150_valid_input() for all inputs */
> + case TVP5150_PORT_AIP1A:
> + case TVP5150_PORT_AIP1B:
> + case TVP5150_PORT_SVIDEO:
> + if (!tvp5150_valid_input(ep_np, ep.port)) {
> + dev_err(dev,
> + "Invalid endpoint %pOF on port %d\n",
> + ep.local_node, ep.port);
> + ret = -EINVAL;
> + goto err;
> + }
> + break;
> + case TVP5150_PORT_YOUT:
> + ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np),
> + &bus_cfg);
> + if (ret)
> + goto err;
> +
> + flags = bus_cfg.bus.parallel.flags;
> +
> + if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
> + !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
> + flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
> + flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
> + ret = -EINVAL;
> + goto err;
> + }
> +
> + decoder->mbus_type = bus_cfg.bus_type;
> + break;
> + default:
> + dev_err(dev, "Invalid port %d for endpoint %pOF\n",
> + ep.port, ep.local_node);
> + ret = -EINVAL;
> + goto err;
> + }
>
> - decoder->mbus_type = bus_cfg.bus_type;
> + of_node_get(ep_np);
> + decoder->endpoints[ep.port] = ep_np;
>
> + found = true;
> + }
> + return found ? 0 : -ENODEV;
> err:
> - of_node_put(ep);
> return ret;
> }
>
> +static void tvp5150_dt_cleanup(struct tvp5150 *decoder)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < TVP5150_PORT_NUM; i++)
> + of_node_put(decoder->endpoints[i]);
> +}
> +
> static const char * const tvp5150_test_patterns[2] = {
> "Disabled",
> "Black screen"
> @@ -1604,7 +1861,7 @@ static int tvp5150_probe(struct i2c_client *c,
> res = tvp5150_parse_dt(core, np);
> if (res) {
> dev_err(sd->dev, "DT parsing error: %d\n", res);
> - return res;
> + goto err_cleanup_dt;
> }
> } else {
> /* Default to BT.656 embedded sync */
> @@ -1612,24 +1869,16 @@ static int tvp5150_probe(struct i2c_client *c,
> }
>
> v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
> + sd->internal_ops = &tvp5150_internal_ops;
> sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>
> -#if defined(CONFIG_MEDIA_CONTROLLER)
> - core->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
> - core->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
> - core->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
> -
> - sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
> -
> - res = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, core->pads);
> - if (res < 0)
> - return res;
> -
> -#endif
> + res = tvp5150_mc_init(sd);
> + if (res)
> + goto err_cleanup_dt;
>
> res = tvp5150_detect_version(core);
> if (res < 0)
> - return res;
> + goto err_cleanup_dt;
>
> core->norm = V4L2_STD_ALL; /* Default is autodetect */
> core->detected_norm = V4L2_STD_UNKNOWN;
> @@ -1683,6 +1932,9 @@ static int tvp5150_probe(struct i2c_client *c,
> err:
> v4l2_ctrl_handler_free(&core->hdl);
> return res;
> +err_cleanup_dt:
> + tvp5150_dt_cleanup(core);
> + return res;
> }
>
> static int tvp5150_remove(struct i2c_client *c)
Thanks,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
