[RFC 4/5] powerpc/mpic: Boot print supported interrupt ranges

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As mpic can have non-contiguous source of interrupt range,
print same during boot.

Signed-off-by: Bharat Bhushan <Bharat.Bhushan@xxxxxxx>
---
 arch/powerpc/sysdev/mpic.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index cbf3a51..8df248f 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -155,6 +155,21 @@ struct bus_type mpic_subsys = {
 
 #endif /* CONFIG_MPIC_WEIRD */
 
+static void mpic_show_irq_ranges(struct mpic *mpic)
+{
+	int i;
+
+	pr_info("mpic: Initializing for %d sources\n", mpic->num_sources);
+
+	if (mpic->num_ranges) {
+		pr_info(" Supported source of interrupt ranges\n");
+		for (i = 0; i < mpic->num_ranges; i++)
+			pr_info("  > %d - %d\n", mpic->irq_ranges[i].start_irq,
+				mpic->irq_ranges[i].end_irq);
+
+	}
+}
+
 static int mpic_irq_source_invalid(struct mpic *mpic, unsigned int irq)
 {
 	int i;
@@ -1646,8 +1661,7 @@ void __init mpic_init(struct mpic *mpic)
 	int num_timers = 4;
 
 	BUG_ON(mpic->num_sources == 0);
-
-	printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources);
+	mpic_show_irq_ranges(mpic);
 
 	/* Set current processor priority to max */
 	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux