Actions Semi OWL family SoC's provides support for external interrupt
controller to be connected and controlled using SIRQ pins. S500, S700
and S900 provides 3 SIRQ lines and works independently for 3 external
interrupt controllers.
Signed-off-by: Parthiban Nallathambi <pn@xxxxxxx>
Signed-off-by: Saravanan Sekar <sravanhome@xxxxxxxxx>
---
.../interrupt-controller/actions,owl-sirq.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.txt b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.txt
new file mode 100644
index 000000000000..c5f8a29573c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.txt
@@ -0,0 +1,34 @@
+Actions Semi Owl SoCs SIRQ interrupt controller
+
+S500, S700 and S900 SoC's from Actions provides interface, in which external
+interrupt controller can be connected. It has the following properties:
+
+- inputs three interrupt signal from external interrupt controller
+
+Required properties:
+
+- compatible: should be one of the following
+ "actions,s700-sirq"
+ "actions,s900-sirq"
+- reg: physical base address of the controller and length of memory mapped.
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+ source, should be 2.
+- interrupts: specifies the interrupt line in the interrupt controller and
+ interrupt type (level or edge triggered)
+- sampling-rate-24m: this means the external controller's interrupts can be
+ sampled at 24MHz. Sampling can be specified for each SIRQ lines, as an array
+ element. By default, all lines are sampled at 32KHz.
+
+Example:
+
+sirq: interrupt-controller@e01b0000 {
+ compatible = "actions,s700-sirq";
+ reg = <0 0xe01b0000 0 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ sampling-rate-24m = <0 0 1>;
+};
--
2.14.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
