Each MU has four pairs of rx/tx data register with four rx/tx interrupts which can also be used as a separate channel. Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/mailbox/fsl,mu.txt | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt index 90e4905dfc69..113d6ab931ef 100644 --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt @@ -22,7 +22,14 @@ Required properties: - reg : Should contain the registers location and length - interrupts : Interrupt number. The interrupt specifier format depends on the interrupt controller parent. -- #mbox-cells: Must be 0. Number of cells in a mailbox +- #mbox-cells: Must be: + 0 - for single channel mode. i.MX8* SCU protocol specific. + 1 - for multichannel (generic) mode. + +Optional properties: +------------------- +- clocks : phandle to the input clock. +- fsl,mu-side-b : Should be set for side B MU. Examples: -------- -- 2.18.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
