Hi all, The Tegra Power Management Controller (PMC) can set pad power states and voltage configuration. This series implements pinctrl interfaces for configuring said pad properties. Changelog v4: - Revise the dt-bindings docs v3: - Don't expose tegra_io_pad_is_powered() - Remove tegra_io_pad_set_voltage() stub from pmc.h - Fixes i386 build failure reported by kbuild test robot v2: - Add Tegra186 AO_HV pad - Make the IO pad tables narrower - Add parens to TEGRA_IO_PAD() and TEGRA_IO_PIN_DESC() - Fix a typo in the dt-bindings docs - Remove old pmc pad voltage configuration APIs - Check return value of tegra_io_pad_find() in tegra_io_pad_pinconf_get()/_set() Aapo Vienamo (7): soc/tegra: pmc: Fix pad voltage configuration for Tegra186 soc/tegra: pmc: Factor out DPD register bit calculation soc/tegra: pmc: Implement tegra_io_pad_is_powered() soc/tegra: pmc: Use X macro to generate IO pad tables dt-bindings: Add Tegra PMC pad configuration bindings soc/tegra: pmc: Remove public pad voltage APIs soc/tegra: pmc: Implement pad configuration via pinctrl .../bindings/arm/tegra/nvidia,tegra186-pmc.txt | 92 ++++ .../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 103 +++++ drivers/soc/tegra/pmc.c | 512 +++++++++++++++------ include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h | 18 + include/soc/tegra/pmc.h | 20 +- 5 files changed, 597 insertions(+), 148 deletions(-) create mode 100644 include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
