Hi Ryan,
On 2018/6/18 19:10, Ryan Grachek wrote:
> Certain properties should be moved to the board file to reflect
> the specific properties of the board, and not the SoC. Move these
> properties to proper location and organize properties in both files.
>
> Signed-off-by: Ryan Grachek <ryan@xxxxxxxxx>
Thanks!
Applied to the hisilicon dt tree.
Best Regards,
Wei
> ---
> arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 27 ++++++++++++++++++-----
> arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 27 +++++------------------
> 2 files changed, 27 insertions(+), 27 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> index abc991619c75..1c2a9a5d0477 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> @@ -602,20 +602,37 @@
> };
>
> &dwmmc1 {
> + bus-width = <0x4>;
> + cap-sd-highspeed;
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + sd-uhs-sdr50;
> + sd-uhs-sdr104;
> + disable-wp;
> + cd-inverted;
> + cd-gpios = <&gpio25 3 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd_pmx_func
> + &sd_clk_cfg_func
> + &sd_cfg_func>;
> vmmc-supply = <&ldo16>;
> vqmmc-supply = <&ldo9>;
> status = "okay";
> };
>
> &dwmmc2 { /* WIFI */
> - broken-cd;
> - /* WL_EN */
> - vmmc-supply = <&wlan_en>;
> + bus-width = <0x4>;
> non-removable;
> + broken-cd;
> + cap-sd-highspeed;
> cap-power-off-card;
> keep-power-in-suspend;
> - #address-cells = <0x1>;
> - #size-cells = <0x0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdio_pmx_func
> + &sdio_clk_cfg_func
> + &sdio_cfg_func>;
> + /* WL_EN */
> + vmmc-supply = <&wlan_en>;
> status = "ok";
>
> wlcore: wlcore@2 {
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> index 74c0509f99e9..fe4c9f321b70 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> @@ -1114,15 +1114,10 @@
>
> /* SD */
> dwmmc1: dwmmc1@ff37f000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - cd-inverted;
> compatible = "hisilicon,hi3660-dw-mshc";
> - bus-width = <0x4>;
> - disable-wp;
> - cap-sd-highspeed;
> - card-detect-delay = <200>;
> reg = <0x0 0xff37f000 0x0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&crg_ctrl HI3660_CLK_GATE_SD>,
> <&crg_ctrl HI3660_HCLK_GATE_SD>;
> @@ -1130,16 +1125,8 @@
> clock-frequency = <3200000>;
> resets = <&crg_rst 0x94 18>;
> reset-names = "reset";
> - cd-gpios = <&gpio25 3 0>;
> hisilicon,peripheral-syscon = <&sctrl>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sd_pmx_func
> - &sd_clk_cfg_func
> - &sd_cfg_func>;
> - sd-uhs-sdr12;
> - sd-uhs-sdr25;
> - sd-uhs-sdr50;
> - sd-uhs-sdr104;
> + card-detect-delay = <200>;
> status = "disabled";
> };
>
> @@ -1147,6 +1134,8 @@
> dwmmc2: dwmmc2@ff3ff000 {
> compatible = "hisilicon,hi3660-dw-mshc";
> reg = <0x0 0xff3ff000 0x0 0x1000>;
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>,
> <&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
> @@ -1154,12 +1143,6 @@
> resets = <&crg_rst 0x94 20>;
> reset-names = "reset";
> card-detect-delay = <200>;
> - cap-sd-highspeed;
> - keep-power-in-suspend;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdio_pmx_func
> - &sdio_clk_cfg_func
> - &sdio_cfg_func>;
> status = "disabled";
> };
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
