Certain properties should be moved to the board file to reflect
the specific properties of the board, and not the SoC. Move these
properties to proper location and organize properties in both files.
Signed-off-by: Ryan Grachek <ryan@xxxxxxxxx>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 27 ++++++++++++++++++-----
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 27 +++++------------------
2 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index abc991619c75..1c2a9a5d0477 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -602,20 +602,37 @@
};
&dwmmc1 {
+ bus-width = <0x4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ disable-wp;
+ cd-inverted;
+ cd-gpios = <&gpio25 3 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pmx_func
+ &sd_clk_cfg_func
+ &sd_cfg_func>;
vmmc-supply = <&ldo16>;
vqmmc-supply = <&ldo9>;
status = "okay";
};
&dwmmc2 { /* WIFI */
- broken-cd;
- /* WL_EN */
- vmmc-supply = <&wlan_en>;
+ bus-width = <0x4>;
non-removable;
+ broken-cd;
+ cap-sd-highspeed;
cap-power-off-card;
keep-power-in-suspend;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pmx_func
+ &sdio_clk_cfg_func
+ &sdio_cfg_func>;
+ /* WL_EN */
+ vmmc-supply = <&wlan_en>;
status = "ok";
wlcore: wlcore@2 {
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 74c0509f99e9..fe4c9f321b70 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1114,15 +1114,10 @@
/* SD */
dwmmc1: dwmmc1@ff37f000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cd-inverted;
compatible = "hisilicon,hi3660-dw-mshc";
- bus-width = <0x4>;
- disable-wp;
- cap-sd-highspeed;
- card-detect-delay = <200>;
reg = <0x0 0xff37f000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_SD>,
<&crg_ctrl HI3660_HCLK_GATE_SD>;
@@ -1130,16 +1125,8 @@
clock-frequency = <3200000>;
resets = <&crg_rst 0x94 18>;
reset-names = "reset";
- cd-gpios = <&gpio25 3 0>;
hisilicon,peripheral-syscon = <&sctrl>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd_pmx_func
- &sd_clk_cfg_func
- &sd_cfg_func>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
+ card-detect-delay = <200>;
status = "disabled";
};
@@ -1147,6 +1134,8 @@
dwmmc2: dwmmc2@ff3ff000 {
compatible = "hisilicon,hi3660-dw-mshc";
reg = <0x0 0xff3ff000 0x0 0x1000>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>,
<&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
@@ -1154,12 +1143,6 @@
resets = <&crg_rst 0x94 20>;
reset-names = "reset";
card-detect-delay = <200>;
- cap-sd-highspeed;
- keep-power-in-suspend;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio_pmx_func
- &sdio_clk_cfg_func
- &sdio_cfg_func>;
status = "disabled";
};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
