On i.MX6SL EVK board, the MX6SL_PAD_KEY_ROW5 pin is
used as lcd 3v3 regulator control pin, need to make
sure MX6SL_PAD_KEY_ROW5 is muxed as GPIO function
for controlling lcd 3v3 regulator.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
change since V1:
using a separate pin group for lcd regulator instead of putting gpio pin in hog group.
arch/arm/boot/dts/imx6sl-evk.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 50bdc65..046cfab 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -77,6 +77,8 @@
reg_lcd_3v3: regulator-lcd-3v3 {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
regulator-name = "lcd-3v3";
gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
@@ -410,6 +412,12 @@
>;
};
+ pinctrl_reg_lcd_3v3: reglcd3v3grp {
+ fsl,pins = <
+ MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
