Re: [PATCH v5 1/6] dt-bindings: media: rcar-vin: Align Gen2 and Gen3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

On 2018-07-09 16:19:16 +0200, Jacopo Mondi wrote:
> Align description of the Gen2 and Gen3 bindings for parallel input.
> This commit prepares for description of optional endpoint properties in ports
> subnodes accepting parallel video connections.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>

Acked-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

> ---
>  Documentation/devicetree/bindings/media/rcar_vin.txt | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
> index e25ab07..39c4e6a 100644
> --- a/Documentation/devicetree/bindings/media/rcar_vin.txt
> +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
> @@ -39,9 +39,11 @@ Additionally, an alias named vinX will need to be created to specify
>  which video input device this is.
>  
>  The per-board settings Gen2 platforms:
> - - port sub-node describing a single endpoint connected to the vin
> -   as described in video-interfaces.txt[1]. Only the first one will
> -   be considered as each vin interface has one input port.
> +
> +- port - sub-node describing a single endpoint connected to the VIN
> +  from external SoC pins as described in video-interfaces.txt[1].
> +  Only the first one will be considered as each vin interface has one
> +  input port.
>  
>  The per-board settings Gen3 platforms:
>  
> @@ -52,7 +54,7 @@ from local SoC CSI-2 receivers (port@1) depending on SoC.
>  - renesas,id - ID number of the VIN, VINx in the documentation.
>  - ports
>      - port@0 - sub-node describing a single endpoint connected to the VIN
> -      from external SoC pins described in video-interfaces.txt[1].
> +      from external SoC pins as described in video-interfaces.txt[1].
>        Describing more than one endpoint in port@0 is invalid. Only VIN
>        instances that are connected to external pins should have port@0.
>      - port@1 - sub-nodes describing one or more endpoints connected to
> -- 
> 2.7.4
> 

-- 
Regards,
Niklas Söderlund
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux