Hello, based on Niklas', Laurent's and Sakari's comments on v4, here it is a new version of this series brushing R-Car VIN interface device tree bindings description. The interface supports the following configurable properties: - hsync, vsync and data-enable signal polarities - field signal polarity during even field - parallel data bus widht and data shift. As preferred by Niklas, I have listed the properties in the Gen2 section of the bindings documentation, and referred to them in the Gen3 one. The series, as v4 did, does introduce a new properties in 'video-interfaces.txt' and for this reason the audiance is still a little larger than v3. Thanks j Jacopo Mondi (6): dt-bindings: media: rcar-vin: Align Gen2 and Gen3 dt-bindings: media: rcar-vin: Describe optional ep properties dt-bindings: media: Document data-enable-active property media: v4l2-fwnode: parse 'data-enable-active' prop dt-bindings: media: rcar-vin: Add 'data-enable-active' media: rcar-vin: Handle data-enable polarity .../devicetree/bindings/media/rcar_vin.txt | 29 +++++++++++++++++++--- .../devicetree/bindings/media/video-interfaces.txt | 2 ++ drivers/media/platform/rcar-vin/rcar-dma.c | 5 ++++ drivers/media/v4l2-core/v4l2-fwnode.c | 4 +++ include/media/v4l2-mediabus.h | 2 ++ 5 files changed, 38 insertions(+), 4 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
