[PATCH v5 1/3] iio: hx711: add clock-frequency property in DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add clock-frequency property for hx711 ADC. This is the frequency of
PD_SCK.

After PD_SCK goes high DOUT is read just before PD_SCK goes down again.
This is necessary because of parasitic capacitance on the wiring.

Signed-off-by: Andreas Klinger <ak@xxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/iio/adc/avia-hx711.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
index b3629405f568..2c1b67d33c49 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
@@ -8,11 +8,17 @@ Required properties:
 		See Documentation/devicetree/bindings/gpio/gpio.txt
  - avdd-supply:	Definition of the regulator used as analog supply
 
+Optional properties:
+ - clock-frequency:	Frequency of PD_SCK in Hz
+			Minimum value allowed is 10 kHz because of maximum
+			high time of 50 microseconds.
+
 Example:
 weight@0 {
 	compatible = "avia,hx711";
 	sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
 	dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 	avdd-suppy = <&avdd>;
+	clock-frequency = <100000>;
 };
 
-- 
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux