The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
(QM, QP), and i.MX8QX (QXP, DX).
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx>
---
v3->v4:
* fully change to mailbox binding
* add child node description
v2->v3:
* update a bit to mailbox binding
v1->v2:
* remove status
* changed to mu1
---
.../devicetree/bindings/arm/freescale/fsl,scu.txt | 65 ++++++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
new file mode 100644
index 0000000..11e732a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -0,0 +1,65 @@
+NXP i.MX System Controller Firmware (SCFW)
+--------------------------------------------------------------------
+
+The System Controller Firmware (SCFW) is a low-level system function
+which runs on a dedicated Cortex-M core to provide power, clock, and
+resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+(QM, QP), and i.MX8QX (QXP, DX).
+
+The AP communicates with the SC using a multi-ported MU module found
+in the LSIO subsystem. The current definition of this MU module provides
+5 remote AP connections to the SC to support up to 5 execution environments
+(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+using the MSI bus.
+
+System Controller Device Node:
+=============================
+
+Required properties:
+-------------------
+- compatible: should be "fsl,imx-scu"
+- mboxes: List of phandle of MU mailbox. Should be one of LSIO
+ MU0~M4 for imx8qxp and imx8qm. Users need to make
+ sure not use the one which is conflict with other
+ execution environments. e.g. ATF.
+
+Examples:
+--------
+lsio_mu1: mailbox@5d1c0000 {
+ compatible = "fsl,imx8qxp-mu";
+ reg = <0x0 0x5d1c0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <0>;
+};
+
+scu {
+ compatible = "fsl,imx-scu";
+ mboxes = <&lsio_mu1>;
+};
+
+
+i.MX SCU Client Device Node:
+=========================
+
+Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+Example (imx8qxp):
+-------------
+scu {
+ compatible = "fsl,imx-scu";
+ ...
+
+ clk: clk {
+ ...
+ };
+
+ iomuxc: iomuxc {
+ ...
+ };
+
+ imx8qx-pm {
+ ...
+ }
+ ...
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
