On Mon, Jun 25, 2018 at 05:12:35PM +0200, Miquel Raynal wrote:
> In CP files, the syscons are called CP110_LABEL(syscon<x>) in case of
> future additions. Use the same logic here to prepare the addition of a
> second syscon to access both the thermal IP, the DFX server registers
> and later probably other registers within this same memory area.
You are renaming labels, not nodes.
The example is just an example. Drop that change as it is not necessary.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/arm/marvell/ap806-system-controller.txt | 2 +-
> arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> index a265f1628f36..108e8da600e4 100644
> --- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> +++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> @@ -79,7 +79,7 @@ Required properties:
> - offset: offset address inside the syscon block
>
> Example:
> -ap_syscon: system-controller@6f4000 {
> +ap_syscon0: system-controller@6f4000 {
> compatible = "syscon", "simple-mfd";
> reg = <0x6f4000 0x1000>;
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 4f2a704615b0..550f03b8c96f 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -230,7 +230,7 @@
> status = "disabled";
> };
>
> - ap_syscon: system-controller@6f4000 {
> + ap_syscon0: system-controller@6f4000 {
> compatible = "syscon", "simple-mfd";
> reg = <0x6f4000 0x2000>;
>
> --
> 2.14.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
