Re: [dts] [v2] fix green/blue pio-led on bananapi-r2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2018-06-25 at 12:05 +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> Date: Mon, 25 Jun 2018 11:57:13 +0200
> Subject: [PATCH] [dts] [v2] fix green/blue pio-led
>  pio-leds (near GPIO-Header) are swapped and LOW-active 
>  patch restore this expected behaviour
>  red cannot be switched afaik
> 
> v2: alphabetic order
> 
> Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 531d905d924ff..2b760f90f38c8 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -91,19 +91,19 @@
>  
>  		blue {
>  			label = "bpi-r2:pio:blue";
> -			gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
> +			gpios = <&pio 240 GPIO_ACTIVE_LOW>;
>  			default-state = "off";
>  		};
>  
>  		green {
>  			label = "bpi-r2:pio:green";
> -			gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
> +			gpios = <&pio 241 GPIO_ACTIVE_LOW>;
>  			default-state = "off";
>  		};
>  
>  		red {
>  			label = "bpi-r2:pio:red";
> -			gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
> +			gpios = <&pio 239 GPIO_ACTIVE_LOW>;
>  			default-state = "off";
>  		};
>  	};
> 
>  

Reviewed-by: Sean Wang <sean.wang@xxxxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux