[PATCH] [dts] fix green/blue pio-led on bananapi-r2

["Frank Wunderlich" <FrankWu@xxxxxx>]

From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Date: Sun, 17 Jun 2018 19:11:58 +0200
Subject: [PATCH] [dts] fix green/blue pio-led
 green/blue pio-leds (near GPIO-Header) are swapped and LOW-active
 this patch restore this expected behaviour
 red cannot be switched afaik
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 531d905d924ff..3e8a0ffe8b13e 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -89,21 +89,21 @@
         pinctrl-names = "default";
         pinctrl-0 = <&led_pins_a>;
 
-        blue {
-            label = "bpi-r2:pio:blue";
-            gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
+        green {
+            label = "bpi-r2:pio:green";
+            gpios = <&pio 241 GPIO_ACTIVE_LOW>;
             default-state = "off";
         };
 
-        green {
-            label = "bpi-r2:pio:green";
-            gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
+        blue {
+            label = "bpi-r2:pio:blue";
+            gpios = <&pio 240 GPIO_ACTIVE_LOW>;
             default-state = "off";
         };
 
         red {
             label = "bpi-r2:pio:red";
-            gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
+            gpios = <&pio 239 GPIO_ACTIVE_LOW>;
             default-state = "off";
         };
     };
 
 
 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html