Hi, On Tue, Jun 26, 2018 at 11:41:56AM +0530, Jagan Teki wrote: > On Mon, Mar 5, 2018 at 3:34 PM, Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote: > > The H3 and H5 have a CSI controller based on the one previously found > > in the A31, that is currently supported by the sun6i-csi driver. > > > > Add the compatibles to the device tree bindings and to the driver to > > make it work properly. > > > > This obviously depends on the serie "Initial Allwinner V3s CSI > > Support" by Yong Deng. > > > > Let me know what you think, > > Maxime > > > > Maxime Ripard (2): > > dt-bindings: media: sun6i: Add A31 and H3 compatibles > > media: sun6i: Add A31 compatible > > > > Mylène Josserand (2): > > ARM: dts: sun8i: Add the H3/H5 CSI controller > > [DO NOT MERGE] ARM: dts: sun8i: Add CAM500B camera module to the Nano > > Pi M1+ > > Just trying to understand what interface has been tested with npi-m1+, > is it DVP (parallel) interface? Yes > I've Bananapi 5MP[1] and trying to test on top, and look like its > MIPI CSI2. I guess Yong patch[2] doesn't support CSI2 yet, am I > correct? This is what Yong's cover letter is saying yes :) The name Allwinner chose for this IP is very unfortunate... Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
