On Mon, Mar 5, 2018 at 3:34 PM, Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote: > Hi, > > The H3 and H5 have a CSI controller based on the one previously found > in the A31, that is currently supported by the sun6i-csi driver. > > Add the compatibles to the device tree bindings and to the driver to > make it work properly. > > This obviously depends on the serie "Initial Allwinner V3s CSI > Support" by Yong Deng. > > Let me know what you think, > Maxime > > Maxime Ripard (2): > dt-bindings: media: sun6i: Add A31 and H3 compatibles > media: sun6i: Add A31 compatible > > Mylène Josserand (2): > ARM: dts: sun8i: Add the H3/H5 CSI controller > [DO NOT MERGE] ARM: dts: sun8i: Add CAM500B camera module to the Nano > Pi M1+ Just trying to understand what interface has been tested with npi-m1+, is it DVP (parallel) interface? I've Bananapi 5MP[1] and trying to test on top, and look like its MIPI CSI2. I guess Yong patch[2] doesn't support CSI2 yet, am I correct? [1] https://www.amazon.in/Generic-V3-0-BPI-M3-camera-chipset/dp/B0727N5CD1 [2] https://patchwork.kernel.org/patch/10380067/ Jagan. -- Jagan Teki Senior Linux Kernel Engineer | Amarula Solutions U-Boot, Linux | Upstream Maintainer Hyderabad, India. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
