RE: [PATCH 2/2] dmaengine: xilinx_dma: Enable VDMA S2MM vertical flip support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



<Snip>
> 
> Vertical flip state is exported in xilinx_vdma_config and depending on IP
> configuration(c_enable_vert_flip) vertical flip state is programmed in
> hardware.
> 
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx>
> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>

Acked-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>  

> ---
>  drivers/dma/xilinx/xilinx_dma.c |   22 ++++++++++++++++++++++
>  include/linux/dma/xilinx_dma.h  |    2 ++
>  2 files changed, 24 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/dma/xilinx/xilinx_dma.c
> b/drivers/dma/xilinx/xilinx_dma.c index 27b5235..c124423 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -115,6 +115,9 @@
>  #define XILINX_VDMA_REG_START_ADDRESS(n)	(0x000c + 4 * (n))
>  #define XILINX_VDMA_REG_START_ADDRESS_64(n)	(0x000c + 8 * (n))
> 
> +#define XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP	0x00ec
> +#define XILINX_VDMA_ENABLE_VERTICAL_FLIP	BIT(0)
> +
>  /* HW specific definitions */
>  #define XILINX_DMA_MAX_CHANS_PER_DEVICE	0x20
> 
> @@ -340,6 +343,7 @@ struct xilinx_dma_tx_descriptor {
>   * @start_transfer: Differentiate b/w DMA IP's transfer
>   * @stop_transfer: Differentiate b/w DMA IP's quiesce
>   * @tdest: TDEST value for mcdma
> + * @has_vflip: S2MM vertical flip
>   */
>  struct xilinx_dma_chan {
>  	struct xilinx_dma_device *xdev;
> @@ -376,6 +380,7 @@ struct xilinx_dma_chan {
>  	void (*start_transfer)(struct xilinx_dma_chan *chan);
>  	int (*stop_transfer)(struct xilinx_dma_chan *chan);
>  	u16 tdest;
> +	bool has_vflip;
>  };
> 
>  /**
> @@ -1092,6 +1097,14 @@ static void xilinx_vdma_start_transfer(struct
> xilinx_dma_chan *chan)
>  				desc->async_tx.phys);
> 
>  	/* Configure the hardware using info in the config structure */
> +	if (chan->has_vflip) {
> +		reg = dma_read(chan,
> XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP);
> +		reg &= ~XILINX_VDMA_ENABLE_VERTICAL_FLIP;
> +		reg |= config->vflip_en;
> +		dma_write(chan,
> XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP,
> +			  reg);
> +	}
> +
>  	reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
> 
>  	if (config->frm_cnt_en)
> @@ -2105,6 +2118,8 @@ int xilinx_vdma_channel_set_config(struct
> dma_chan *dchan,
>  	}
> 
>  	chan->config.frm_cnt_en = cfg->frm_cnt_en;
> +	chan->config.vflip_en = cfg->vflip_en;
> +
>  	if (cfg->park)
>  		chan->config.park_frm = cfg->park_frm;
>  	else
> @@ -2428,6 +2443,13 @@ static int xilinx_dma_chan_probe(struct
> xilinx_dma_device *xdev,
>  		chan->direction = DMA_DEV_TO_MEM;
>  		chan->id = chan_id;
>  		chan->tdest = chan_id - xdev->nr_channels;
> +		chan->has_vflip = of_property_read_bool(node,
> +					"xlnx,enable-vert-flip");
> +		if (chan->has_vflip) {
> +			chan->config.vflip_en = dma_read(chan,
> +				XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP)
> &
> +				XILINX_VDMA_ENABLE_VERTICAL_FLIP;
> +		}
> 
>  		chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
>  		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) { diff
> --git a/include/linux/dma/xilinx_dma.h b/include/linux/dma/xilinx_dma.h
> index 34b98f2..5b6e61e 100644
> --- a/include/linux/dma/xilinx_dma.h
> +++ b/include/linux/dma/xilinx_dma.h
> @@ -27,6 +27,7 @@
>   * @delay: Delay counter
>   * @reset: Reset Channel
>   * @ext_fsync: External Frame Sync source
> + * @vflip_en:  Vertical Flip enable
>   */
>  struct xilinx_vdma_config {
>  	int frm_dly;
> @@ -39,6 +40,7 @@ struct xilinx_vdma_config {
>  	int delay;
>  	int reset;
>  	int ext_fsync;
> +	bool vflip_en;
>  };
> 
>  int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
> --
> 1.7.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux