The goal of this series is to to add support for the Amlogic S905W SoC
along with Amlogic's P281 development board and the Tanix TX3 Mini (which
both use the S905W SoC).
I am sending this as request-for-comments because I would like to get
feedback specifically on:
- the naming of the new vendor "Oranth" and their brand "Tanix". more
information regarding their relation can be found in patch #1
- I do not have access to the P281 development board (nor any
documentation apart from what is available in Amlogic's GPL kernel
sources). thus it would be great if someone from Amlogic could confirm
that my .dts is working
- the S905W SoC is a cost-reduced version of the S905X SoC. I have
documented the differences that I am aware of in patch #2. none of
these changes require adjustments to any existing driver/binding
because these changes are either handled in the SCPI firmware (CPU
frequency and DDR interface) or there is no Linux support for them
yet (4k HDMI resolutions and the HW video decoder)
Martin Blumenstingl (5):
dt-bindings: add vendor prefix for Shenzhen Oranth Technology Co.,
Ltd.
dt-bindings: arm: amlogic: Add support for GXL S905W and the P281
board
dt-bindings: arm: amlogic: Add support for the Oranth Tanix TX3 Mini
ARM64: dts: meson-gxl: add support for the S905W SoC and the P281
board - WiP
ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini
.../devicetree/bindings/arm/amlogic.txt | 7 ++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 2 ++
.../boot/dts/amlogic/meson-gxl-s905w-p281.dts | 22 +++++++++++++++++++
.../dts/amlogic/meson-gxl-s905w-tx3-mini.dts | 22 +++++++++++++++++++
.../boot/dts/amlogic/meson-gxl-s905w.dtsi | 20 +++++++++++++++++
6 files changed, 74 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w.dtsi
--
2.18.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
