This adds a new remoteproc driver for TI Programmable Realtime Units
(PRUs).
This has been tested working on AM1808 (LEGO MINDSTORMS EV3) using the
sample rpmsg client driver.
Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
---
MAINTAINERS | 5 +
drivers/remoteproc/Kconfig | 7 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/ti_pru_rproc.c | 660 ++++++++++++++++++++++++++++++
4 files changed, 673 insertions(+)
create mode 100644 drivers/remoteproc/ti_pru_rproc.c
diff --git a/MAINTAINERS b/MAINTAINERS
index edf3cf5ea691..06dea089d9ae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14288,6 +14288,11 @@ L: netdev@xxxxxxxxxxxxxxx
S: Maintained
F: drivers/net/ethernet/ti/netcp*
+TI PRU REMOTEPROC DRIVER
+R: David Lechner <david@xxxxxxxxxxxxxx>
+F: Documentation/devicetree/bindings/remoteproc/ti_pru_rproc.txt
+F: drivers/remoteproc/ti_pru_rproc.c
+
TI TAS571X FAMILY ASoC CODEC DRIVER
M: Kevin Cernekee <cernekee@xxxxxxxxxxxx>
L: alsa-devel@xxxxxxxxxxxxxxxx (moderated for non-subscribers)
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index cd1c168fd188..ae6e725e1755 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -158,6 +158,13 @@ config ST_REMOTEPROC
config ST_SLIM_REMOTEPROC
tristate
+config TI_PRU_REMOTEPROC
+ tristate "TI Programmable Realtime Unit"
+ depends on ARCH_DAVINCI_DA8XX || SOC_AM33XX
+ help
+ Say y here to support TI Programmable Runtime Units (PRUs) via the
+ remote processor framework.
+
endif # REMOTEPROC
endmenu
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 02627ede8d4a..451efee5c8d3 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -23,3 +23,4 @@ qcom_wcnss_pil-y += qcom_wcnss.o
qcom_wcnss_pil-y += qcom_wcnss_iris.o
obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o
obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
+obj-$(CONFIG_TI_PRU_REMOTEPROC) += ti_pru_rproc.o
diff --git a/drivers/remoteproc/ti_pru_rproc.c b/drivers/remoteproc/ti_pru_rproc.c
new file mode 100644
index 000000000000..cd8302c318c9
--- /dev/null
+++ b/drivers/remoteproc/ti_pru_rproc.c
@@ -0,0 +1,660 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 David Lechner <david@xxxxxxxxxxxxxx>
+ *
+ * Remoteproc driver for TI Programmable Realtime Unit
+ */
+
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_data/ti-pruss.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/remoteproc.h>
+#include <linux/regmap.h>
+#include <linux/sizes.h>
+#include <linux/types.h>
+
+#include "remoteproc_internal.h"
+
+#define SZ_12K 0x3000
+
+/* control/status registers */
+#define TI_PRU_CS_CONTROL 0x0
+#define TI_PRU_CS_STATUS 0x4
+#define TI_PRU_CS_WAKEUP 0x8
+#define TI_PRU_CS_CYCLECNT 0xc
+
+/* control register bits */
+#define TI_PRU_CONTROL_PCRESETVAL GENMASK(31, 16)
+#define TI_PRU_CONTROL_RUNSTATE BIT(15)
+#define TI_PRU_CONTROL_SINGLESTEP BIT(8)
+#define TI_PRU_CONTROL_COUNTENABLE BIT(3)
+#define TI_PRU_CONTROL_SLEEPING BIT(2)
+#define TI_PRU_CONTROL_ENABLE BIT(1)
+#define TI_PRU_CONTROL_SOFTRESET BIT(0)
+
+/* status bits */
+#define TI_PRU_STATUS_PCOUNTER GENMASK(15, 0)
+
+/* interrupt controller registers */
+#define TI_PRU_INTC_GLBLEN 0x10
+#define TI_PRU_INTC_STATIDXSET 0x20
+#define TI_PRU_INTC_STATIDXCLR 0x24
+#define TI_PRU_INTC_ENIDXSET 0x28
+#define TI_PRU_INTC_HSTINTENIDXSET 0x34
+#define TI_PRU_INTC_CHANMAP0 0x400
+#define TI_PRU_INTC_POLARITY0 0xd00
+#define TI_PRU_INTC_TYPE0 0xd80
+#define TI_PRU_INTC_HOSTMAP0 0x800
+
+/* config registers */
+#define TI_PRU_CFG_SYSCFG 0x4
+
+/* syscfg bits */
+#define TI_PRU_SYSCFG_SUB_MWAIT BIT(5)
+#define TI_PRU_SYSCFG_STANDBY_INIT BIT(4)
+#define TI_PRU_SYSCFG_STANDBY_MODE_MASK GENMASK(3, 2)
+#define TI_PRU_SYSCFG_STANDBY_MODE_SMART (2 << 2)
+#define TI_PRU_SYSCFG_IDLE_MODE_MASK GENMASK(1, 0)
+#define TI_PRU_SYSCFG_IDLE_MODE_SMART (2 << 0)
+
+enum ti_pru {
+ TI_PRU0,
+ TI_PRU1,
+ NUM_TI_PRU
+};
+
+enum ti_pru_type {
+ TI_PRU_TYPE_AM18XX,
+ TI_PRU_TYPE_AM335X,
+ NUM_TI_PRU_TYPE
+};
+
+enum ti_pru_evtout {
+ TI_PRU_EVTOUT0,
+ TI_PRU_EVTOUT1,
+ TI_PRU_EVTOUT2,
+ TI_PRU_EVTOUT3,
+ TI_PRU_EVTOUT4,
+ TI_PRU_EVTOUT5,
+ TI_PRU_EVTOUT6,
+ TI_PRU_EVTOUT7,
+ NUM_TI_PRU_EVTOUT
+};
+
+struct ti_pru_mem_region {
+ off_t offset;
+ size_t size;
+};
+
+/**
+ * ti_pru_shared_info - common init info for the PRUSS
+ * @ram: shared RAM, if present
+ * @intc: interrupt controller
+ * @cfg: configuration registers, if present
+ */
+struct ti_pru_shared_info {
+ struct ti_pru_mem_region ram;
+ struct ti_pru_mem_region intc;
+ struct ti_pru_mem_region cfg;
+};
+
+/**
+ * ti_pru_info - init info each individual PRU
+ * @ram: PRU RAM
+ * @ctrl: PRU control/status registers
+ * @dbg: PRU dbg registers
+ * @inst: instruction RAM
+ * @vq_arm_to_pru_event: The index of the PRU system event interrupt used
+ * used by the ARM for kicking the PRU
+ * @vq_pru_to_arm_event: The index of the PRU system event interrupt used
+ * used by the PRU for kicking the ARM
+ */
+struct ti_pru_info {
+ struct ti_pru_mem_region ram;
+ struct ti_pru_mem_region ctrl;
+ struct ti_pru_mem_region dbg;
+ struct ti_pru_mem_region inst;
+ int vq_arm_to_pru_event;
+ int vq_pru_to_arm_event;
+};
+
+struct ti_pru_device_info {
+ struct ti_pru_shared_info shared;
+ struct ti_pru_info pru[NUM_TI_PRU];
+};
+
+static const struct ti_pru_device_info ti_pru_devices[NUM_TI_PRU_TYPE] = {
+ [TI_PRU_TYPE_AM18XX] = {
+ .shared = {
+ .intc = { .offset = 0x4000, .size = SZ_12K, },
+ },
+ .pru[TI_PRU0] = {
+ .ram = { .offset = 0x0000, .size = SZ_512, },
+ .ctrl = { .offset = 0x7000, .size = SZ_1K, },
+ .dbg = { .offset = 0x7400, .size = SZ_1K, },
+ .inst = { .offset = 0x8000, .size = SZ_4K, },
+ .vq_arm_to_pru_event = 32,
+ .vq_pru_to_arm_event = 33,
+ },
+ .pru[TI_PRU1] = {
+ .ram = { .offset = 0x2000, .size = SZ_512, },
+ .ctrl = { .offset = 0x7800, .size = SZ_1K, },
+ .dbg = { .offset = 0x7c00, .size = SZ_1K, },
+ .inst = { .offset = 0xc000, .size = SZ_4K, },
+ .vq_arm_to_pru_event = 34,
+ .vq_pru_to_arm_event = 35,
+ },
+ },
+ [TI_PRU_TYPE_AM335X] = {
+ .shared = {
+ .ram = { .offset = 0x10000, .size = SZ_12K, },
+ .intc = { .offset = 0x20000, .size = SZ_8K, },
+ .cfg = { .offset = 0x26000, .size = SZ_8K, },
+ },
+ .pru[TI_PRU0] = {
+ .ram = { .offset = 0x00000, .size = SZ_8K, },
+ .ctrl = { .offset = 0x22000, .size = SZ_1K, },
+ .dbg = { .offset = 0x22400, .size = SZ_1K, },
+ .inst = { .offset = 0x34000, .size = SZ_8K, },
+ .vq_arm_to_pru_event = 16,
+ .vq_pru_to_arm_event = 17,
+ },
+ .pru[TI_PRU1] = {
+ .ram = { .offset = 0x02000, .size = SZ_8K, },
+ .ctrl = { .offset = 0x24000, .size = SZ_1K, },
+ .dbg = { .offset = 0x24400, .size = SZ_1K, },
+ .inst = { .offset = 0x38000, .size = SZ_8K, },
+ .vq_arm_to_pru_event = 18,
+ .vq_pru_to_arm_event = 19,
+ },
+ },
+};
+
+/**
+ * ti_pru_shared_data - private platform driver data
+ * @info: init info common to both PRU cores
+ * @dev: the platform device
+ * @base: the mapped memory region of the PRUSS
+ * @intc: regmap of the interrupt controller
+ * @cfg: regmap of configuration registers
+ * @pru: per-PRU core data
+ */
+struct ti_pru_shared_data {
+ const struct ti_pru_shared_info *info;
+ struct device *dev;
+ void __iomem *base;
+ struct regmap *intc;
+ struct regmap *cfg;
+ struct rproc *pru[NUM_TI_PRU];
+};
+
+/**
+ * ti_pru_data - private data for each PRU core
+ * @info: static init info
+ * @shared: pointer to the shared data struct
+ * @ctrl: regmap of the PRU control/status register
+ * @vq_irq: interrupt used for rpmsg
+ */
+struct ti_pru_data {
+ const struct ti_pru_info *info;
+ struct ti_pru_shared_data *shared;
+ struct regmap *ctrl;
+ int vq_irq;
+};
+
+static int ti_pru_rproc_start(struct rproc *rproc)
+{
+ struct ti_pru_data *pru = rproc->priv;
+ u32 val;
+
+ val = (rproc->bootaddr >> 2) << (ffs(TI_PRU_CONTROL_PCRESETVAL) - 1);
+ val |= TI_PRU_CONTROL_ENABLE;
+
+ return regmap_write(pru->ctrl, TI_PRU_CS_CONTROL, val);
+}
+
+static int ti_pru_rproc_stop(struct rproc *rproc)
+{
+ struct ti_pru_data *pru = rproc->priv;
+ u32 mask;
+
+ mask = TI_PRU_CONTROL_ENABLE;
+
+ return regmap_write_bits(pru->ctrl, TI_PRU_CS_CONTROL, mask, 0);
+}
+
+static void ti_pru_rproc_kick(struct rproc *rproc, int vqid)
+{
+ struct ti_pru_data *pru = rproc->priv;
+ struct ti_pru_shared_data *shared = pru->shared;
+ u32 val;
+
+ val = pru->info->vq_arm_to_pru_event;
+
+ regmap_write(shared->intc, TI_PRU_INTC_STATIDXSET, val);
+}
+
+static void *ti_pru_rproc_da_to_va(struct rproc *rproc, u64 da, int len, int map)
+{
+ struct ti_pru_data *pru = rproc->priv;
+ struct ti_pru_shared_data *shared = pru->shared;
+
+ if (map == 0) {
+ if (da + len > pru->info->inst.size)
+ return ERR_PTR(-EINVAL);
+
+ return shared->base + pru->info->inst.offset + da;
+ }
+
+ if (map == 1) {
+ if (da + len > pru->info->ram.size)
+ return ERR_PTR(-EINVAL);
+
+ return shared->base + pru->info->ram.offset + da;
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+static const struct rproc_ops ti_pru_rproc_ops = {
+ .start = ti_pru_rproc_start,
+ .stop = ti_pru_rproc_stop,
+ .kick = ti_pru_rproc_kick,
+ .da_to_va = ti_pru_rproc_da_to_va,
+};
+
+static struct regmap_config ti_pru_ctrl_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x2c,
+};
+
+static struct regmap_config ti_pru_intc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x1500,
+};
+
+static struct regmap_config ti_pru_cfg_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x40,
+};
+
+static const struct of_device_id ti_pru_rproc_of_match[] = {
+ {
+ .compatible = "ti,da850-pru-rproc",
+ .data = &ti_pru_devices[TI_PRU_TYPE_AM18XX]
+ },
+ {
+ .compatible = "ti,am3352-pru-rproc",
+ .data = &ti_pru_devices[TI_PRU_TYPE_AM335X]
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ti_pru_rproc_of_match);
+
+static irqreturn_t ti_pru_handle_vq_irq(int irq, void *p)
+{
+ struct rproc *rproc = p;
+ struct ti_pru_data *pru = rproc->priv;
+
+ regmap_write(pru->shared->intc, TI_PRU_INTC_STATIDXCLR,
+ pru->info->vq_pru_to_arm_event);
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t ti_pru_vq_irq_thread(int irq, void *p)
+{
+ struct rproc *rproc = p;
+
+ rproc_vq_interrupt(rproc, 0);
+ rproc_vq_interrupt(rproc, 1);
+
+ return IRQ_HANDLED;
+}
+
+static void ti_pru_free_rproc(void *data)
+{
+ struct rproc *rproc = data;
+
+ rproc_free(rproc);
+}
+
+static struct rproc *ti_pru_init_one_rproc(struct ti_pru_shared_data *shared,
+ const struct ti_pru_info *info,
+ enum ti_pru id)
+{
+ struct device *dev = shared->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ const char *name;
+ char irq_name[16];
+ struct rproc *rproc;
+ struct ti_pru_data *pru;
+ int err;
+
+ name = devm_kasprintf(dev, GFP_KERNEL, "pru%u", id);
+ if (!name)
+ return ERR_PTR(-ENOMEM);
+
+ rproc = rproc_alloc(dev, name, &ti_pru_rproc_ops, NULL, sizeof(*pru));
+ if (!rproc)
+ return ERR_PTR(-ENOMEM);
+
+ devm_add_action(dev, ti_pru_free_rproc, rproc);
+
+ /* don't auto-boot for now - bad firmware can lock up the system */
+ rproc->auto_boot = false;
+
+ pru = rproc->priv;
+ pru->info = info;
+ pru->shared = shared;
+
+ snprintf(irq_name, 16, "%s-vq", name);
+
+ pru->vq_irq = platform_get_irq_byname(pdev, irq_name);
+ if (pru->vq_irq < 0) {
+ dev_err(&rproc->dev, "failed to get vq IRQ\n");
+ return ERR_PTR(pru->vq_irq);
+ }
+
+ err = devm_request_threaded_irq(&rproc->dev, pru->vq_irq,
+ ti_pru_handle_vq_irq,
+ ti_pru_vq_irq_thread, 0, name, rproc);
+ if (err < 0) {
+ dev_err(&rproc->dev, "failed to request vq IRQ\n");
+ return ERR_PTR(err);
+ }
+
+ pru->ctrl = devm_regmap_init_mmio(&rproc->dev,
+ shared->base + info->ctrl.offset,
+ &ti_pru_ctrl_regmap_config);
+ if (IS_ERR(pru->ctrl)) {
+ dev_err(&rproc->dev, "failed to init ctrl regmap\n");
+ return ERR_CAST(pru->ctrl);
+ }
+
+ return rproc;
+}
+
+/**
+ * ti_pru_init_intc_polarity - configure polarity interrupt event
+ * @intc: the interrtup controller regmap
+ * @event: the source event
+ */
+static void ti_pru_init_intc_polarity(struct regmap *intc, int event)
+{
+ int offset, shift, mask;
+
+ /* 32 events per register */
+ offset = event / 32 * 4;
+ shift = event % 32;
+ mask = 1 << shift;
+
+ /* polarity is always high (1) */
+ regmap_write_bits(intc, TI_PRU_INTC_POLARITY0 + offset, mask, ~0);
+}
+
+/**
+ * ti_pru_init_intc_type - configure type of interrupt event
+ * @intc: the interrtup controller regmap
+ * @event: the source event
+ */
+static void ti_pru_init_intc_type(struct regmap *intc, int event)
+{
+ int offset, shift, mask;
+
+ /* 32 events per register */
+ offset = event / 32 * 4;
+ shift = event % 32;
+ mask = 1 << shift;
+
+ /* type is always pulse (0) */
+ regmap_write_bits(intc, TI_PRU_INTC_TYPE0 + offset, mask, 0);
+}
+
+/**
+ * ti_pru_init_intc_channel_map - configure interrupt event to channel mapping
+ * @intc: the interrtup controller regmap
+ * @event: the source event
+ * @ch: the channel to be assigned to the event
+ */
+static void ti_pru_init_intc_channel_map(struct regmap *intc, int event, int ch)
+{
+ int offset, shift, mask, val;
+
+ /* 4 channels per 32-bit register */
+ offset = event / 4 * 4;
+ shift = event % 4 * 8;
+ mask = 0xff << shift;
+ val = ch << shift;
+
+ regmap_write_bits(intc, TI_PRU_INTC_CHANMAP0 + offset, mask, val);
+}
+
+/**
+ * ti_pru_init_intc_host_map - configure interrupt channel to host mapping
+ * @intc: the interrtup controller regmap
+ * @ch: the source channel
+ * @host: the host interrupt to be assigned to the channel
+ */
+static void ti_pru_init_intc_host_map(struct regmap *intc, int ch, int host)
+{
+ int offset, shift, mask, val;
+
+ /* 4 hosts per 32-bit register */
+ offset = ch / 4 * 4;
+ shift = ch % 4 * 8;
+ mask = 0xff << shift;
+ val = host << shift;
+
+ regmap_write_bits(intc, TI_PRU_INTC_HOSTMAP0 + offset, mask, val);
+}
+
+static void ti_pru_init_intc(struct regmap *intc,
+ const struct ti_pru_device_info *info)
+{
+ int arm_to_pru0 = info->pru[TI_PRU0].vq_arm_to_pru_event;
+ int arm_to_pru1 = info->pru[TI_PRU1].vq_arm_to_pru_event;
+ int pru0_to_arm = info->pru[TI_PRU0].vq_pru_to_arm_event;
+ int pru1_to_arm = info->pru[TI_PRU1].vq_pru_to_arm_event;
+
+ /* set polarity of system events */
+ ti_pru_init_intc_polarity(intc, arm_to_pru0);
+ ti_pru_init_intc_polarity(intc, arm_to_pru1);
+ ti_pru_init_intc_polarity(intc, pru0_to_arm);
+ ti_pru_init_intc_polarity(intc, pru1_to_arm);
+
+ /* set type of system events */
+ ti_pru_init_intc_type(intc, arm_to_pru0);
+ ti_pru_init_intc_type(intc, arm_to_pru1);
+ ti_pru_init_intc_type(intc, pru0_to_arm);
+ ti_pru_init_intc_type(intc, pru1_to_arm);
+
+ /* map system events to channels */
+ ti_pru_init_intc_channel_map(intc, arm_to_pru0, 0);
+ ti_pru_init_intc_channel_map(intc, arm_to_pru1, 1);
+ ti_pru_init_intc_channel_map(intc, pru0_to_arm, 2);
+ ti_pru_init_intc_channel_map(intc, pru1_to_arm, 3);
+
+ /* map channels to host interrupts */
+ ti_pru_init_intc_host_map(intc, 0, 0); /* ARM to PRU0 */
+ ti_pru_init_intc_host_map(intc, 1, 1); /* ARM to PRU1 */
+ ti_pru_init_intc_host_map(intc, 2, 2); /* PRU0 to ARM */
+ ti_pru_init_intc_host_map(intc, 3, 3); /* PRU1 to ARM */
+
+ /* clear system interrupts */
+ regmap_write(intc, TI_PRU_INTC_STATIDXCLR, arm_to_pru0);
+ regmap_write(intc, TI_PRU_INTC_STATIDXCLR, arm_to_pru1);
+ regmap_write(intc, TI_PRU_INTC_STATIDXCLR, pru0_to_arm);
+ regmap_write(intc, TI_PRU_INTC_STATIDXCLR, pru1_to_arm);
+
+ /* enable host interrupts for kicking */
+ regmap_write(intc, TI_PRU_INTC_HSTINTENIDXSET, 0); /* ARM to PRU0 */
+ regmap_write(intc, TI_PRU_INTC_HSTINTENIDXSET, 1); /* ARM to PRU1 */
+ regmap_write(intc, TI_PRU_INTC_HSTINTENIDXSET, 2); /* PRU0 to ARM */
+ regmap_write(intc, TI_PRU_INTC_HSTINTENIDXSET, 3); /* PRU1 to ARM */
+
+ /* enable system events for kicking */
+ regmap_write(intc, TI_PRU_INTC_ENIDXSET, arm_to_pru0);
+ regmap_write(intc, TI_PRU_INTC_ENIDXSET, arm_to_pru1);
+ regmap_write(intc, TI_PRU_INTC_ENIDXSET, pru0_to_arm);
+ regmap_write(intc, TI_PRU_INTC_ENIDXSET, pru1_to_arm);
+
+ /* enable all interrupts */
+ regmap_write_bits(intc, TI_PRU_INTC_GLBLEN, 1, 1);
+}
+
+static int ti_pru_rproc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ti_pruss_platform_data *pdata = dev_get_platdata(dev);
+ const struct of_device_id *of_id;
+ const struct ti_pru_device_info *info;
+ struct ti_pru_shared_data *shared;
+ struct resource *res;
+ int err;
+
+ of_id = of_match_device(ti_pru_rproc_of_match, dev);
+ if (!of_id || !of_id->data)
+ return -EINVAL;
+
+ info = of_id->data;
+
+ shared = devm_kzalloc(dev, sizeof(*shared), GFP_KERNEL);
+
+ platform_set_drvdata(pdev, shared);
+
+ shared->info = &info->shared;
+ shared->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ shared->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(shared->base)) {
+ dev_err(dev, "failed to ioremap resource\n");
+ return PTR_ERR(shared->base);
+ }
+
+ shared->intc = devm_regmap_init_mmio(dev,
+ shared->base + shared->info->intc.offset,
+ &ti_pru_intc_regmap_config);
+ if (IS_ERR(shared->intc)) {
+ dev_err(dev, "failed to init intc regmap\n");
+ return PTR_ERR(shared->intc);
+ }
+
+ if (shared->info->cfg.size) {
+ shared->cfg = devm_regmap_init_mmio(dev,
+ shared->base + shared->info->cfg.offset,
+ &ti_pru_cfg_regmap_config);
+ if (IS_ERR(shared->cfg)) {
+ dev_err(dev, "failed to init cfg regmap\n");
+ return PTR_ERR(shared->cfg);
+ }
+ }
+
+ shared->pru[TI_PRU0] = ti_pru_init_one_rproc(shared, &info->pru[TI_PRU0],
+ TI_PRU0);
+ if (IS_ERR(shared->pru[TI_PRU0]))
+ return PTR_ERR(shared->pru[TI_PRU0]);
+
+ shared->pru[TI_PRU1] = ti_pru_init_one_rproc(shared, &info->pru[TI_PRU1],
+ TI_PRU1);
+ if (IS_ERR(shared->pru[TI_PRU1]))
+ return PTR_ERR(shared->pru[TI_PRU1]);
+
+ pm_runtime_enable(dev);
+
+ err = pm_runtime_get_sync(dev);
+ if (err < 0)
+ goto err_pm_runtime_disable;
+
+ if (pdata) {
+ err = pdata->deassert_reset(pdev, pdata->reset_name);
+ if (err < 0) {
+ dev_err(dev, "Failed to reset pruss\n");
+ goto err_pm_runtime_put;
+ }
+ }
+
+ if (shared->cfg) {
+ int mask, val;
+
+ mask = TI_PRU_SYSCFG_IDLE_MODE_MASK | TI_PRU_SYSCFG_STANDBY_MODE_MASK;
+ val = TI_PRU_SYSCFG_IDLE_MODE_SMART | TI_PRU_SYSCFG_STANDBY_MODE_SMART;
+ regmap_write_bits(shared->cfg, TI_PRU_CFG_SYSCFG, mask, val);
+
+ mask = TI_PRU_SYSCFG_STANDBY_INIT;
+ val = 0;
+ regmap_write_bits(shared->cfg, TI_PRU_CFG_SYSCFG, mask, val);
+
+ err = regmap_read_poll_timeout(shared->cfg, TI_PRU_CFG_SYSCFG,
+ val, !(val & TI_PRU_SYSCFG_SUB_MWAIT), 5, 50);
+ if (err < 0) {
+ dev_err(dev, "timeout while enabling pruss\n");
+ goto err_pm_runtime_put;
+ }
+ }
+
+ ti_pru_init_intc(shared->intc, info);
+
+ err = rproc_add(shared->pru[TI_PRU0]);
+ if (err < 0)
+ goto err_assert_reset;
+
+ err = rproc_add(shared->pru[TI_PRU1]);
+ if (err < 0)
+ goto err_del_pru0;
+
+ return 0;
+
+err_del_pru0:
+ rproc_del(shared->pru[TI_PRU0]);
+err_assert_reset:
+ if (pdata)
+ pdata->assert_reset(pdev, pdata->reset_name);
+err_pm_runtime_put:
+ pm_runtime_put(dev);
+err_pm_runtime_disable:
+ pm_runtime_disable(dev);
+
+ return err;
+}
+
+static int ti_pru_rproc_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ti_pruss_platform_data *pdata = dev_get_platdata(dev);
+ struct ti_pru_shared_data *shared = platform_get_drvdata(pdev);
+
+ rproc_del(shared->pru[TI_PRU1]);
+ rproc_del(shared->pru[TI_PRU0]);
+ if (pdata)
+ pdata->assert_reset(pdev, pdata->reset_name);
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
+
+ return 0;
+}
+
+static struct platform_driver ti_pru_rproc_driver = {
+ .probe = ti_pru_rproc_probe,
+ .remove = ti_pru_rproc_remove,
+ .driver = {
+ .name = "ti-pru-rproc",
+ .of_match_table = ti_pru_rproc_of_match,
+ },
+};
+module_platform_driver(ti_pru_rproc_driver);
+
+MODULE_AUTHOR("David Lechner <david@xxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Remoteproc driver for TI PRU");
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
