Update binding document for MSM8996. CC: Rob Herring <robh+dt@xxxxxxxxxx> CC: Mark Rutland <mark.rutland@xxxxxxx> CC: devicetree@xxxxxxxxxxxxxxx Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx> --- .../devicetree/bindings/media/qcom,camss.txt | 44 +++++++++++++++++++--- 1 file changed, 38 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt index e938eb0..09eb6ed 100644 --- a/Documentation/devicetree/bindings/media/qcom,camss.txt +++ b/Documentation/devicetree/bindings/media/qcom,camss.txt @@ -5,8 +5,9 @@ Qualcomm Camera Subsystem - compatible: Usage: required Value type: <stringlist> - Definition: Should contain: + Definition: Should contain one of: - "qcom,msm8916-camss" + - "qcom,msm8996-camss" - reg: Usage: required Value type: <prop-encoded-array> @@ -19,11 +20,16 @@ Qualcomm Camera Subsystem - "csiphy0_clk_mux" - "csiphy1" - "csiphy1_clk_mux" + - "csiphy2" (8996 only) + - "csiphy2_clk_mux" (8996 only) - "csid0" - "csid1" + - "csid2" (8996 only) + - "csid3" (8996 only) - "ispif" - "csi_clk_mux" - "vfe0" + - "vfe1" (8996 only) - interrupts: Usage: required Value type: <prop-encoded-array> @@ -34,10 +40,14 @@ Qualcomm Camera Subsystem Definition: Should contain the following entries: - "csiphy0" - "csiphy1" + - "csiphy2" (8996 only) - "csid0" - "csid1" + - "csid2" (8996 only) + - "csid3" (8996 only) - "ispif" - "vfe0" + - "vfe1" (8996 only) - power-domains: Usage: required Value type: <prop-encoded-array> @@ -57,6 +67,7 @@ Qualcomm Camera Subsystem - "ispif_ahb" - "csiphy0_timer" - "csiphy1_timer" + - "csiphy2_timer" (8996 only) - "csi0_ahb" - "csi0" - "csi0_phy" @@ -67,9 +78,25 @@ Qualcomm Camera Subsystem - "csi1_phy" - "csi1_pix" - "csi1_rdi" + - "csi2_ahb" (8996 only) + - "csi2" (8996 only) + - "csi2_phy" (8996 only) + - "csi2_pix" (8996 only) + - "csi2_rdi" (8996 only) + - "csi3_ahb" (8996 only) + - "csi3" (8996 only) + - "csi3_phy" (8996 only) + - "csi3_pix" (8996 only) + - "csi3_rdi" (8996 only) - "ahb" - "vfe0" - "csi_vfe0" + - "vfe0_ahb", (8996 only) + - "vfe0_stream", (8996 only) + - "vfe1", (8996 only) + - "csi_vfe1", (8996 only) + - "vfe1_ahb", (8996 only) + - "vfe1_stream", (8996 only) - "vfe_ahb" - "vfe_axi" - vdda-supply: @@ -90,14 +117,18 @@ Qualcomm Camera Subsystem - reg: Usage: required Value type: <u32> - Definition: Selects CSI2 PHY interface - PHY0 or PHY1. + Definition: Selects CSI2 PHY interface - PHY0, PHY1 + or PHY2 (8996 only) Endpoint node properties: - clock-lanes: Usage: required Value type: <u32> - Definition: The physical clock lane index. The value - must always be <1> as the physical clock - lane is lane 1. + Definition: The physical clock lane index. On 8916 + the value must always be <1> as the physical + clock lane is lane 1. On 8996 the value must + always be <7> as the hardware supports D-PHY + and C-PHY, indexes are in a common set and + D-PHY physical clock lane is labeled as 7. - data-lanes: Usage: required Value type: <prop-encoded-array> @@ -105,7 +136,8 @@ Qualcomm Camera Subsystem Position of an entry determines the logical lane number, while the value of an entry indicates physical lane index. Lane swapping - is supported. + is supported. Physical lane indexes for + 8916: 0, 2, 3, 4; for 8996: 0, 1, 2, 3. * An Example -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
