Add "vqmmc-supply" property for mmc0/mmc1 to indicate the supply connected
to the IO lines. Also add dt node for ldo1 regulator required for mmc1
vqmmc-supply.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 154fdd7a7022..ba030c496f51 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -37,6 +37,14 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 {
+ compatible = "regulator-fixed";
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
};
&k2g_pinctrl {
@@ -144,6 +152,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&vcc3v3_dcin_reg>;
+ vqmmc-supply = <&vcc3v3_dcin_reg>;
cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -152,6 +161,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+ vqmmc-supply = <&vcc1v8_ldo1_reg>;
ti,non-removable;
status = "okay";
};
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
