Hi everyone,
This series enables the AXP805 PMIC found on the Pine64 Pine H64 board.
The AXP805 seems to be identical to the AXP806 when comparing datasheets.
The Pine H64 uses the PMIC in stand-alone or "self-working" mode, using
the I2C interface. Neither features are currently supported. This series
adds support for them, and then adds the PMIC to the device tree.
Patch 1 adds a new device tree property to describe the self-working mode
for the AXP806.
Patch 2 adds support for the newly added property to the driver.
Patch 3 adds support for the using AXP806 with I2C.
Patch 4 converts raw clock/reset indices for the H6 R_CCU currently found
in the device tree to macros defined as part of the device tree bindings.
Patch 5 adds the PMIC and its regulators to the Pine H64 device tree.
Please have a look.
Regards
ChenYu
Chen-Yu Tsai (4):
dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
mfd: axp20x: Add self-working mode support for AXP806
mfd: axp20x: Support AXP806 in I2C mode
arm64: dts: allwinner: h6: Use macros for R_CCU clock and reset
indices
Icenowy Zheng (1):
arm64: dts: allwinner: h6: enable AXP805 PMIC on Pine H64
.../devicetree/bindings/mfd/axp20x.txt | 7 +-
.../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 109 ++++++++++++++++++
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 9 +-
drivers/mfd/axp20x-i2c.c | 2 +
drivers/mfd/axp20x.c | 30 ++++-
5 files changed, 149 insertions(+), 8 deletions(-)
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
