On 12-06-18, 16:32, Taniya Das wrote:
> +static int qcom_get_related_cpus(struct device_node *np, struct cpumask *m)
> +{
> + struct device_node *cpu_np, *freq_np;
> + int cpu;
> +
> + for_each_possible_cpu(cpu) {
> + cpu_np = of_cpu_device_node_get(cpu);
> + if (!cpu_np)
> + continue;
> + freq_np = of_parse_phandle(cpu_np, "qcom,freq-domain", 0);
> + if (!freq_np)
> + continue;
> + if (freq_np == np)
> + cpumask_set_cpu(cpu, m);
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_cpu_resources_init(struct platform_device *pdev,
> + struct device_node *np, unsigned int cpu)
> +{
> + struct cpufreq_qcom *c;
> + struct resource res;
> + struct device *dev = &pdev->dev;
> + void __iomem *en_base;
> + int index, ret;
> +
> + c = devm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
> + if (!c)
> + return -ENOMEM;
> +
> + index = of_property_match_string(np, "reg-names", "enable");
> + if (index < 0)
> + return index;
> +
> + if (of_address_to_resource(np, index, &res))
> + return -ENOMEM;
> +
> + en_base = devm_ioremap(dev, res.start, resource_size(&res));
> + if (!en_base) {
> + dev_err(dev, "Unable to map %s enable-base\n", np->name);
> + return -ENOMEM;
> + }
> +
> + /* FW should be in enabled state to proceed */
> + if (!(readl_relaxed(en_base) & 0x1)) {
> + dev_err(dev, "%s firmware not enabled\n", np->name);
> + return -ENODEV;
> + }
> + devm_iounmap(&pdev->dev, en_base);
> +
> + index = of_property_match_string(np, "reg-names", "perf");
> + if (index < 0)
> + return index;
> +
> + if (of_address_to_resource(np, index, &res))
> + return -ENOMEM;
> +
> + c->perf_base = devm_ioremap(dev, res.start, resource_size(&res));
> + if (!c->perf_base) {
> + dev_err(dev, "Unable to map %s perf-base\n", np->name);
> + return -ENOMEM;
> + }
> +
> + index = of_property_match_string(np, "reg-names", "lut");
> + if (index < 0)
> + return index;
> +
> + if (of_address_to_resource(np, index, &res))
> + return -ENOMEM;
> +
> + c->lut_base = devm_ioremap(dev, res.start, resource_size(&res));
> + if (!c->lut_base) {
> + dev_err(dev, "Unable to map %s lut-base\n", np->name);
> + return -ENOMEM;
> + }
> +
> + ret = qcom_get_related_cpus(np, &c->related_cpus);
> + if (ret) {
> + dev_err(dev, "%s failed to get related CPUs\n", np->name);
> + return ret;
> + }
> +
> + c->max_cores = cpumask_weight(&c->related_cpus);
> + if (!c->max_cores)
> + return -ENOENT;
> +
> + ret = qcom_read_lut(pdev, c);
> + if (ret) {
> + dev_err(dev, "%s failed to read LUT\n", np->name);
> + return ret;
> + }
> +
> + qcom_freq_domain_map[cpu] = c;
This still looks wrong. You have removed the for-each-cpu loop here, so what
will happen now is that you will allocate a different "struct cpufreq_qcom" for
every CPU, even if they are related. Is that what you should be doing ? I think
there should still be a single copy of that structure which must be used by all
related CPUs.
> +
> + return 0;
> +}
> +
> +static int qcom_resources_init(struct platform_device *pdev)
> +{
> + struct device_node *np, *cpu_np;
> + unsigned int cpu;
> + int ret;
> +
> + for_each_possible_cpu(cpu) {
> + cpu_np = of_cpu_device_node_get(cpu);
> + if (!cpu_np) {
> + dev_err(&pdev->dev, "Failed to get cpu %d device\n",
> + cpu);
> + continue;
> + }
> +
> + np = of_parse_phandle(cpu_np, "qcom,freq-domain", 0);
> + if (!np) {
> + dev_err(&pdev->dev, "Failed to get freq-domain device\n");
> + return -EINVAL;
> + }
> +
> + of_node_put(cpu_np);
> +
> + ret = qcom_cpu_resources_init(pdev, np, cpu);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
