On Fri, Jun 15, 2018 at 6:30 PM, Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx> wrote: > As we move stuff around, some doc references are broken. Fix some of > them via this script: > ./scripts/documentation-file-ref-check --fix > > Manually checked that produced results are valid. > > Acked-by: Matthias Brugger <matthias.bgg@xxxxxxxxx> > Acked-by: Takashi Iwai <tiwai@xxxxxxx> > Acked-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx> > Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx> > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx> > --- > .../bindings/clock/st/st,clkgen.txt | 8 ++++---- > .../devicetree/bindings/clock/ti/gate.txt | 2 +- > .../bindings/clock/ti/interface.txt | 2 +- > .../bindings/cpufreq/cpufreq-mediatek.txt | 2 +- > .../bindings/devfreq/rk3399_dmc.txt | 2 +- > .../bindings/gpu/arm,mali-midgard.txt | 2 +- > .../bindings/gpu/arm,mali-utgard.txt | 2 +- > .../devicetree/bindings/mfd/mt6397.txt | 2 +- > .../devicetree/bindings/mfd/sun6i-prcm.txt | 2 +- > .../bindings/mmc/exynos-dw-mshc.txt | 2 +- > .../devicetree/bindings/net/dsa/ksz.txt | 2 +- > .../devicetree/bindings/net/dsa/mt7530.txt | 2 +- > .../devicetree/bindings/power/fsl,imx-gpc.txt | 2 +- > .../bindings/power/wakeup-source.txt | 2 +- > .../devicetree/bindings/usb/rockchip,dwc3.txt | 2 +- > Documentation/hwmon/ina2xx | 2 +- > Documentation/maintainer/pull-requests.rst | 2 +- > Documentation/translations/ko_KR/howto.rst | 2 +- > MAINTAINERS | 20 +++++++++---------- > drivers/net/ethernet/intel/Kconfig | 8 ++++---- > drivers/soundwire/stream.c | 8 ++++---- > fs/Kconfig.binfmt | 2 +- > fs/binfmt_misc.c | 2 +- > 23 files changed, 41 insertions(+), 41 deletions(-) > > diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt > index 7364953d0d0b..45ac19bfa0a9 100644 > --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt > +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt > @@ -31,10 +31,10 @@ This binding uses the common clock binding[1]. > Each subnode should use the binding described in [2]..[7] > > [1] Documentation/devicetree/bindings/clock/clock-bindings.txt > -[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt > -[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt > -[7] Documentation/devicetree/bindings/clock/st,quadfs.txt > -[8] Documentation/devicetree/bindings/clock/st,flexgen.txt > +[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt > +[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt > +[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt > +[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt > > > Required properties: > diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt > index 03f8fdee62a7..56d603c1f716 100644 > --- a/Documentation/devicetree/bindings/clock/ti/gate.txt > +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt > @@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for > that is used. > > [1] Documentation/devicetree/bindings/clock/clock-bindings.txt > -[2] Documentation/devicetree/bindings/clock/gate-clock.txt > +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt > [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt > > Required properties: > diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt > index 3111a409fea6..3f4704040140 100644 > --- a/Documentation/devicetree/bindings/clock/ti/interface.txt > +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt > @@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate > clock) and hardware autoidle enable / disable. > > [1] Documentation/devicetree/bindings/clock/clock-bindings.txt > -[2] Documentation/devicetree/bindings/clock/gate-clock.txt > +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt > > Required properties: > - compatible : shall be one of: > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt > index d36f07e0a2bb..0551c78619de 100644 > --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt > @@ -8,7 +8,7 @@ Required properties: > "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock > source (usually MAINPLL) when the original CPU PLL is under > transition and not stable yet. > - Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for > + Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for > generic clock consumer properties. > - operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt > for detail. > diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt > index d6d2833482c9..fc2bcbe26b1e 100644 > --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt > +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt > @@ -12,7 +12,7 @@ Required properties: > - clocks: Phandles for clock specified in "clock-names" property > - clock-names : The name of clock used by the DFI, must be > "pclk_ddr_mon"; > -- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt > +- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt > for details. > - center-supply: DMC supply node. > - status: Marks the node enabled/disabled. > diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt > index 039219df05c5..18a2cde2e5f3 100644 > --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt > +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt > @@ -34,7 +34,7 @@ Optional properties: > - mali-supply : Phandle to regulator for the Mali device. Refer to > Documentation/devicetree/bindings/regulator/regulator.txt for details. > > -- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt > +- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt > for details. > > > diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt > index c1f65d1dac1d..63cd91176a68 100644 > --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt > +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt > @@ -44,7 +44,7 @@ Optional properties: > > - memory-region: > Memory region to allocate from, as defined in > - Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt > + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt > > - mali-supply: > Phandle to regulator for the Mali device, as defined in > diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt > index d1df77f4d655..0ebd08af777d 100644 > --- a/Documentation/devicetree/bindings/mfd/mt6397.txt > +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt > @@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules: > It is interfaced to host controller using SPI interface by a proprietary hardware > called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. > See the following for pwarp node definitions: > -Documentation/devicetree/bindings/soc/pwrap.txt > +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt > > This document describes the binding for MFD device and its sub module. > > diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt > index dd2c06540485..4d21ffdb0fc1 100644 > --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt > +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt > @@ -9,7 +9,7 @@ Required properties: > > The prcm node may contain several subdevices definitions: > - see Documentation/devicetree/clk/sunxi.txt for clock devices > - - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset > + - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset > controller devices > > > diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > index a58c173b7ab9..0419a63f73a0 100644 > --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > @@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host) > rest of the gpios (depending on the bus-width property) are the data lines in > no particular order. The format of the gpio specifier depends on the gpio > controller. > -(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt) > +(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt) > > Example: > > diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt > index fd23904ac68e..a700943218ca 100644 > --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt > +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt > @@ -6,7 +6,7 @@ Required properties: > - compatible: For external switch chips, compatible string must be exactly one > of: "microchip,ksz9477" > > -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional > +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional > required and optional properties. > > Examples: > diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt > index a9bc27b93ee3..aa3527f71fdc 100644 > --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt > +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt > @@ -31,7 +31,7 @@ Required properties for the child nodes within ports container: > - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled > "cpu". > > -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional > +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional > required, optional properties and how the integrated switch subnodes must > be specified. > > diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt > index b31d6bbeee16..726ec2875223 100644 > --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt > +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt > @@ -14,7 +14,7 @@ Required properties: > datasheet > - interrupts: Should contain one interrupt specifier for the GPC interrupt > - clocks: Must contain an entry for each entry in clock-names. > - See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. > + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. > - clock-names: Must include the following entries: > - ipg > > diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt > index 5d254ab13ebf..cfd74659fbed 100644 > --- a/Documentation/devicetree/bindings/power/wakeup-source.txt > +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt > @@ -22,7 +22,7 @@ List of legacy properties and respective binding document > 3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt > 4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt > Documentation/devicetree/bindings/mfd/tc3589x.txt > - Documentation/devicetree/bindings/input/ads7846.txt > + Documentation/devicetree/bindings/input/touchscreen/ads7846.txt > 5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt > 6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt > 7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt > diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt > index 50a31536e975..252a05c5d976 100644 > --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt > @@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of > the node is not important. The content of the node is defined in dwc3.txt. > > Phy documentation is provided in the following places: > -Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt > +Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt > > Example device nodes: > > diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx > index cfd31d94c872..72d16f08e431 100644 > --- a/Documentation/hwmon/ina2xx > +++ b/Documentation/hwmon/ina2xx > @@ -53,7 +53,7 @@ bus supply voltage. > > The shunt value in micro-ohms can be set via platform data or device tree at > compile-time or via the shunt_resistor attribute in sysfs at run-time. Please > -refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings > +refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings > if the device tree is used. > > Additionally ina226 supports update_interval attribute as described in > diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst > index a19db3458b56..22b271de0304 100644 > --- a/Documentation/maintainer/pull-requests.rst > +++ b/Documentation/maintainer/pull-requests.rst > @@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command:: > > that will create a signed tag called ``char-misc-4.15-rc1`` based on the > last commit in the ``char-misc-next`` branch, and sign it with your gpg key > -(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`). > +(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`). > > Linus will only accept pull requests based on a signed tag. Other > maintainers may differ. > diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst > index 624654bdcd8a..a8197e072599 100644 > --- a/Documentation/translations/ko_KR/howto.rst > +++ b/Documentation/translations/ko_KR/howto.rst > @@ -160,7 +160,7 @@ mtk.manpages@xxxxxxxxx의 메인테이너에게 보낼 것을 권장한다. > 독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기 > 때문이다. > > - :ref:`Documentation/process/stable_kernel_rules.rst <stable_kernel_rules>` > + :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` > 이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며 > 여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면 > 무엇을 해야 하는지를 설명한다. > diff --git a/MAINTAINERS b/MAINTAINERS > index 09554034be46..5871dd5060f6 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -4513,7 +4513,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS > M: David Lechner <david@xxxxxxxxxxxxxx> > S: Maintained > F: drivers/gpu/drm/tinydrm/ili9225.c > -F: Documentation/devicetree/bindings/display/ili9225.txt > +F: Documentation/devicetree/bindings/display/ilitek,ili9225.txt > > DRM DRIVER FOR INTEL I810 VIDEO CARDS > S: Orphan / Obsolete > @@ -4599,13 +4599,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS > M: David Lechner <david@xxxxxxxxxxxxxx> > S: Maintained > F: drivers/gpu/drm/tinydrm/st7586.c > -F: Documentation/devicetree/bindings/display/st7586.txt > +F: Documentation/devicetree/bindings/display/sitronix,st7586.txt > > DRM DRIVER FOR SITRONIX ST7735R PANELS > M: David Lechner <david@xxxxxxxxxxxxxx> > S: Maintained > F: drivers/gpu/drm/tinydrm/st7735r.c > -F: Documentation/devicetree/bindings/display/st7735r.txt > +F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt > > DRM DRIVER FOR TDFX VIDEO CARDS > S: Orphan / Obsolete > @@ -4824,7 +4824,7 @@ M: Eric Anholt <eric@xxxxxxxxxx> > S: Supported > F: drivers/gpu/drm/v3d/ > F: include/uapi/drm/v3d_drm.h > -F: Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt > +F: Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt > T: git git://anongit.freedesktop.org/drm/drm-misc > > DRM DRIVERS FOR VC4 > @@ -5735,7 +5735,7 @@ M: Madalin Bucur <madalin.bucur@xxxxxxx> > L: netdev@xxxxxxxxxxxxxxx > S: Maintained > F: drivers/net/ethernet/freescale/fman > -F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt > +F: Documentation/devicetree/bindings/net/fsl-fman.txt > > FREESCALE QORIQ PTP CLOCK DRIVER > M: Yangbo Lu <yangbo.lu@xxxxxxx> > @@ -7425,7 +7425,7 @@ M: Linus Walleij <linus.walleij@xxxxxxxxxx> > L: linux-iio@xxxxxxxxxxxxxxx > S: Maintained > F: drivers/iio/gyro/mpu3050* > -F: Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt > +F: Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt > > IOC3 ETHERNET DRIVER > M: Ralf Baechle <ralf@xxxxxxxxxxxxxx> > @@ -8700,7 +8700,7 @@ M: Guenter Roeck <linux@xxxxxxxxxxxx> > L: linux-hwmon@xxxxxxxxxxxxxxx > S: Maintained > F: Documentation/hwmon/max6697 > -F: Documentation/devicetree/bindings/i2c/max6697.txt > +F: Documentation/devicetree/bindings/hwmon/max6697.txt > F: drivers/hwmon/max6697.c > F: include/linux/platform_data/max6697.h > > @@ -9080,7 +9080,7 @@ M: Martin Donnelly <martin.donnelly@xxxxxx> > M: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx> > S: Maintained > F: drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c > -F: Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt > +F: Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt > > MEGARAID SCSI/SAS DRIVERS > M: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx> > @@ -10728,7 +10728,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER > M: Willy Tarreau <willy@xxxxxxxxxxx> > M: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx> > S: Odd Fixes > -F: Documentation/misc-devices/lcd-panel-cgram.txt > +F: Documentation/auxdisplay/lcd-panel-cgram.txt > F: drivers/misc/panel.c > For Documentation/auxdisplay/lcd-panel-cgram.txt: Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx> > PARALLEL PORT SUBSYSTEM > @@ -13291,7 +13291,7 @@ M: Vinod Koul <vkoul@xxxxxxxxxx> > L: alsa-devel@xxxxxxxxxxxxxxxx (moderated for non-subscribers) > T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git > S: Supported > -F: Documentation/sound/alsa/compress_offload.txt > +F: Documentation/sound/designs/compress-offload.rst > F: include/sound/compress_driver.h > F: include/uapi/sound/compress_* > F: sound/core/compress_offload.c > diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig > index 14d287bed33c..1ab613eb5796 100644 > --- a/drivers/net/ethernet/intel/Kconfig > +++ b/drivers/net/ethernet/intel/Kconfig > @@ -33,7 +33,7 @@ config E100 > to identify the adapter. > > More specific information on configuring the driver is in > - <file:Documentation/networking/e100.txt>. > + <file:Documentation/networking/e100.rst>. > > To compile this driver as a module, choose M here. The module > will be called e100. > @@ -49,7 +49,7 @@ config E1000 > <http://support.intel.com> > > More specific information on configuring the driver is in > - <file:Documentation/networking/e1000.txt>. > + <file:Documentation/networking/e1000.rst>. > > To compile this driver as a module, choose M here. The module > will be called e1000. > @@ -94,7 +94,7 @@ config IGB > <http://support.intel.com> > > More specific information on configuring the driver is in > - <file:Documentation/networking/e1000.txt>. > + <file:Documentation/networking/e1000.rst>. > > To compile this driver as a module, choose M here. The module > will be called igb. > @@ -130,7 +130,7 @@ config IGBVF > <http://support.intel.com> > > More specific information on configuring the driver is in > - <file:Documentation/networking/e1000.txt>. > + <file:Documentation/networking/e1000.rst>. > > To compile this driver as a module, choose M here. The module > will be called igbvf. > diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c > index 8974a0fcda1b..4b5e250e8615 100644 > --- a/drivers/soundwire/stream.c > +++ b/drivers/soundwire/stream.c > @@ -1291,7 +1291,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream) > * > * @stream: Soundwire stream > * > - * Documentation/soundwire/stream.txt explains this API in detail > + * Documentation/driver-api/soundwire/stream.rst explains this API in detail > */ > int sdw_prepare_stream(struct sdw_stream_runtime *stream) > { > @@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream) > * > * @stream: Soundwire stream > * > - * Documentation/soundwire/stream.txt explains this API in detail > + * Documentation/driver-api/soundwire/stream.rst explains this API in detail > */ > int sdw_enable_stream(struct sdw_stream_runtime *stream) > { > @@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream) > * > * @stream: Soundwire stream > * > - * Documentation/soundwire/stream.txt explains this API in detail > + * Documentation/driver-api/soundwire/stream.rst explains this API in detail > */ > int sdw_disable_stream(struct sdw_stream_runtime *stream) > { > @@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream) > * > * @stream: Soundwire stream > * > - * Documentation/soundwire/stream.txt explains this API in detail > + * Documentation/driver-api/soundwire/stream.rst explains this API in detail > */ > int sdw_deprepare_stream(struct sdw_stream_runtime *stream) > { > diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt > index 57a27c42b5ac..56df483de619 100644 > --- a/fs/Kconfig.binfmt > +++ b/fs/Kconfig.binfmt > @@ -168,7 +168,7 @@ config BINFMT_MISC > will automatically feed it to the correct interpreter. > > You can do other nice things, too. Read the file > - <file:Documentation/binfmt_misc.txt> to learn how to use this > + <file:Documentation/admin-guide/binfmt-misc.rst> to learn how to use this > feature, <file:Documentation/admin-guide/java.rst> for information about how > to include Java support. and <file:Documentation/admin-guide/mono.rst> for > information about how to include Mono-based .NET support. > diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c > index 4de191563261..4b5fff31ef27 100644 > --- a/fs/binfmt_misc.c > +++ b/fs/binfmt_misc.c > @@ -4,7 +4,7 @@ > * Copyright (C) 1997 Richard Günther > * > * binfmt_misc detects binaries via a magic or filename extension and invokes > - * a specified wrapper. See Documentation/binfmt_misc.txt for more details. > + * a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details. > */ > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > -- > 2.17.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
