[PATCH v4 16/26] docs: Fix more broken references

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.

Acked-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
Acked-by: Takashi Iwai <tiwai@xxxxxxx>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
---
 .../bindings/clock/st/st,clkgen.txt           |  8 ++++----
 .../devicetree/bindings/clock/ti/gate.txt     |  2 +-
 .../bindings/clock/ti/interface.txt           |  2 +-
 .../bindings/cpufreq/cpufreq-mediatek.txt     |  2 +-
 .../bindings/devfreq/rk3399_dmc.txt           |  2 +-
 .../bindings/gpu/arm,mali-midgard.txt         |  2 +-
 .../bindings/gpu/arm,mali-utgard.txt          |  2 +-
 .../devicetree/bindings/mfd/mt6397.txt        |  2 +-
 .../devicetree/bindings/mfd/sun6i-prcm.txt    |  2 +-
 .../bindings/mmc/exynos-dw-mshc.txt           |  2 +-
 .../devicetree/bindings/net/dsa/ksz.txt       |  2 +-
 .../devicetree/bindings/net/dsa/mt7530.txt    |  2 +-
 .../devicetree/bindings/power/fsl,imx-gpc.txt |  2 +-
 .../bindings/power/wakeup-source.txt          |  2 +-
 .../devicetree/bindings/usb/rockchip,dwc3.txt |  2 +-
 Documentation/hwmon/ina2xx                    |  2 +-
 Documentation/maintainer/pull-requests.rst    |  2 +-
 Documentation/translations/ko_KR/howto.rst    |  2 +-
 MAINTAINERS                                   | 20 +++++++++----------
 drivers/net/ethernet/intel/Kconfig            |  8 ++++----
 drivers/soundwire/stream.c                    |  8 ++++----
 fs/Kconfig.binfmt                             |  2 +-
 fs/binfmt_misc.c                              |  2 +-
 23 files changed, 41 insertions(+), 41 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 7364953d0d0b..45ac19bfa0a9 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -31,10 +31,10 @@ This binding uses the common clock binding[1].
 Each subnode should use the binding described in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
-[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
-[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
+[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
 
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
index 03f8fdee62a7..56d603c1f716 100644
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
 that is used.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
 [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
index 3111a409fea6..3f4704040140 100644
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
 clock) and hardware autoidle enable / disable.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
 
 Required properties:
 - compatible : shall be one of:
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
index d36f07e0a2bb..0551c78619de 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -8,7 +8,7 @@ Required properties:
 	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
 			  source (usually MAINPLL) when the original CPU PLL is under
 			  transition and not stable yet.
-	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
 	generic clock consumer properties.
 - operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
 	for detail.
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
index d6d2833482c9..fc2bcbe26b1e 100644
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -12,7 +12,7 @@ Required properties:
 - clocks:		 Phandles for clock specified in "clock-names" property
 - clock-names :		 The name of clock used by the DFI, must be
 			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp.txt
 			 for details.
 - center-supply:	 DMC supply node.
 - status:		 Marks the node enabled/disabled.
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
index 039219df05c5..18a2cde2e5f3 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
@@ -34,7 +34,7 @@ Optional properties:
 - mali-supply : Phandle to regulator for the Mali device. Refer to
   Documentation/devicetree/bindings/regulator/regulator.txt for details.
 
-- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
   for details.
 
 
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index c1f65d1dac1d..63cd91176a68 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -44,7 +44,7 @@ Optional properties:
 
   - memory-region:
     Memory region to allocate from, as defined in
-    Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
 
   - mali-supply:
     Phandle to regulator for the Mali device, as defined in
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index d1df77f4d655..0ebd08af777d 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
 See the following for pwarp node definitions:
-Documentation/devicetree/bindings/soc/pwrap.txt
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
 
 This document describes the binding for MFD device and its sub module.
 
diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
index dd2c06540485..4d21ffdb0fc1 100644
--- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
+++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
@@ -9,7 +9,7 @@ Required properties:
 
 The prcm node may contain several subdevices definitions:
  - see Documentation/devicetree/clk/sunxi.txt for clock devices
- - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
+ - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
    controller devices
 
 
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index a58c173b7ab9..0419a63f73a0 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host)
   rest of the gpios (depending on the bus-width property) are the data lines in
   no particular order. The format of the gpio specifier depends on the gpio
   controller.
-(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
+(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index fd23904ac68e..a700943218ca 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -6,7 +6,7 @@ Required properties:
 - compatible: For external switch chips, compatible string must be exactly one
   of: "microchip,ksz9477"
 
-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.
 
 Examples:
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index a9bc27b93ee3..aa3527f71fdc 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -31,7 +31,7 @@ Required properties for the child nodes within ports container:
 - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
 	 "cpu".
 
-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required, optional properties and how the integrated switch subnodes must
 be specified.
 
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
index b31d6bbeee16..726ec2875223 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
@@ -14,7 +14,7 @@ Required properties:
   datasheet
 - interrupts: Should contain one interrupt specifier for the GPC interrupt
 - clocks: Must contain an entry for each entry in clock-names.
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
   - ipg
 
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
index 5d254ab13ebf..cfd74659fbed 100644
--- a/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -22,7 +22,7 @@ List of legacy properties and respective binding document
 3. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
 4. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
-				Documentation/devicetree/bindings/input/ads7846.txt
+				Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
 5. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
 6. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
 7. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index 50a31536e975..252a05c5d976 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
+Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
 
 Example device nodes:
 
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
index cfd31d94c872..72d16f08e431 100644
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@@ -53,7 +53,7 @@ bus supply voltage.
 
 The shunt value in micro-ohms can be set via platform data or device tree at
 compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
-refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
+refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings
 if the device tree is used.
 
 Additionally ina226 supports update_interval attribute as described in
diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst
index a19db3458b56..22b271de0304 100644
--- a/Documentation/maintainer/pull-requests.rst
+++ b/Documentation/maintainer/pull-requests.rst
@@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command::
 
 that will create a signed tag called ``char-misc-4.15-rc1`` based on the
 last commit in the ``char-misc-next`` branch, and sign it with your gpg key
-(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`).
+(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`).
 
 Linus will only accept pull requests based on a signed tag. Other
 maintainers may differ.
diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst
index 624654bdcd8a..a8197e072599 100644
--- a/Documentation/translations/ko_KR/howto.rst
+++ b/Documentation/translations/ko_KR/howto.rst
@@ -160,7 +160,7 @@ mtk.manpages@xxxxxxxxx의 메인테이너에게 보낼 것을 권장한다.
     독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기
     때문이다.
 
-  :ref:`Documentation/process/stable_kernel_rules.rst <stable_kernel_rules>`
+  :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
     이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며
     여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면
     무엇을 해야 하는지를 설명한다.
diff --git a/MAINTAINERS b/MAINTAINERS
index 09554034be46..5871dd5060f6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4513,7 +4513,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS
 M:	David Lechner <david@xxxxxxxxxxxxxx>
 S:	Maintained
 F:	drivers/gpu/drm/tinydrm/ili9225.c
-F:	Documentation/devicetree/bindings/display/ili9225.txt
+F:	Documentation/devicetree/bindings/display/ilitek,ili9225.txt
 
 DRM DRIVER FOR INTEL I810 VIDEO CARDS
 S:	Orphan / Obsolete
@@ -4599,13 +4599,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS
 M:	David Lechner <david@xxxxxxxxxxxxxx>
 S:	Maintained
 F:	drivers/gpu/drm/tinydrm/st7586.c
-F:	Documentation/devicetree/bindings/display/st7586.txt
+F:	Documentation/devicetree/bindings/display/sitronix,st7586.txt
 
 DRM DRIVER FOR SITRONIX ST7735R PANELS
 M:	David Lechner <david@xxxxxxxxxxxxxx>
 S:	Maintained
 F:	drivers/gpu/drm/tinydrm/st7735r.c
-F:	Documentation/devicetree/bindings/display/st7735r.txt
+F:	Documentation/devicetree/bindings/display/sitronix,st7735r.txt
 
 DRM DRIVER FOR TDFX VIDEO CARDS
 S:	Orphan / Obsolete
@@ -4824,7 +4824,7 @@ M:	Eric Anholt <eric@xxxxxxxxxx>
 S:	Supported
 F:	drivers/gpu/drm/v3d/
 F:	include/uapi/drm/v3d_drm.h
-F:	Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
+F:	Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DRM DRIVERS FOR VC4
@@ -5735,7 +5735,7 @@ M:	Madalin Bucur <madalin.bucur@xxxxxxx>
 L:	netdev@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	drivers/net/ethernet/freescale/fman
-F:	Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+F:	Documentation/devicetree/bindings/net/fsl-fman.txt
 
 FREESCALE QORIQ PTP CLOCK DRIVER
 M:	Yangbo Lu <yangbo.lu@xxxxxxx>
@@ -7425,7 +7425,7 @@ M:	Linus Walleij <linus.walleij@xxxxxxxxxx>
 L:	linux-iio@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	drivers/iio/gyro/mpu3050*
-F:	Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt
+F:	Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
 
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@xxxxxxxxxxxxxx>
@@ -8700,7 +8700,7 @@ M:	Guenter Roeck <linux@xxxxxxxxxxxx>
 L:	linux-hwmon@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	Documentation/hwmon/max6697
-F:	Documentation/devicetree/bindings/i2c/max6697.txt
+F:	Documentation/devicetree/bindings/hwmon/max6697.txt
 F:	drivers/hwmon/max6697.c
 F:	include/linux/platform_data/max6697.h
 
@@ -9080,7 +9080,7 @@ M:	Martin Donnelly <martin.donnelly@xxxxxx>
 M:	Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>
 S:	Maintained
 F:	drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
-F:	Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+F:	Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
 
 MEGARAID SCSI/SAS DRIVERS
 M:	Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
@@ -10728,7 +10728,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER
 M:	Willy Tarreau <willy@xxxxxxxxxxx>
 M:	Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
 S:	Odd Fixes
-F:	Documentation/misc-devices/lcd-panel-cgram.txt
+F:	Documentation/auxdisplay/lcd-panel-cgram.txt
 F:	drivers/misc/panel.c
 
 PARALLEL PORT SUBSYSTEM
@@ -13291,7 +13291,7 @@ M:	Vinod Koul <vkoul@xxxxxxxxxx>
 L:	alsa-devel@xxxxxxxxxxxxxxxx (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 S:	Supported
-F:	Documentation/sound/alsa/compress_offload.txt
+F:	Documentation/sound/designs/compress-offload.rst
 F:	include/sound/compress_driver.h
 F:	include/uapi/sound/compress_*
 F:	sound/core/compress_offload.c
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 14d287bed33c..1ab613eb5796 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -33,7 +33,7 @@ config E100
 	  to identify the adapter.
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e100.txt>.
+	  <file:Documentation/networking/e100.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called e100.
@@ -49,7 +49,7 @@ config E1000
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
+	  <file:Documentation/networking/e1000.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000.
@@ -94,7 +94,7 @@ config IGB
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
+	  <file:Documentation/networking/e1000.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called igb.
@@ -130,7 +130,7 @@ config IGBVF
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
+	  <file:Documentation/networking/e1000.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called igbvf.
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index 8974a0fcda1b..4b5e250e8615 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -1291,7 +1291,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_prepare_stream(struct sdw_stream_runtime *stream)
 {
@@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_enable_stream(struct sdw_stream_runtime *stream)
 {
@@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_disable_stream(struct sdw_stream_runtime *stream)
 {
@@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
 {
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 57a27c42b5ac..56df483de619 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -168,7 +168,7 @@ config BINFMT_MISC
 	  will automatically feed it to the correct interpreter.
 
 	  You can do other nice things, too. Read the file
-	  <file:Documentation/binfmt_misc.txt> to learn how to use this
+	  <file:Documentation/admin-guide/binfmt-misc.rst> to learn how to use this
 	  feature, <file:Documentation/admin-guide/java.rst> for information about how
 	  to include Java support. and <file:Documentation/admin-guide/mono.rst> for
           information about how to include Mono-based .NET support.
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index 4de191563261..4b5fff31ef27 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -4,7 +4,7 @@
  * Copyright (C) 1997 Richard Günther
  *
  * binfmt_misc detects binaries via a magic or filename extension and invokes
- * a specified wrapper. See Documentation/binfmt_misc.txt for more details.
+ * a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-- 
2.17.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux