On Wed, Jun 13, 2018 at 11:12:40PM +0300, Sergei Shtylyov wrote:
> Define the Condor/V3HSK board dependent parts of the DU and LVDS device
> nodes. Also add the device nodes for Thine THC63LVD1024 LVDS decoder and
> Analog Devices ADV7511W HDMI transmitter...
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>
> ---
> Changes in version 2:
> - added the V3HSK DT update, reworded the description, renamed the patch;
> - added a space between the HDMI node name and a brace.
>
> arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 106 +++++++++++++++++++++
> arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 120 ++++++++++++++++++++++++
Laurent, could you review this?
> 2 files changed, 226 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
> @@ -45,6 +45,56 @@
> regulator-boot-on;
> regulator-always-on;
> };
> +
> + d1_8v: regulator-2 {
> + compatible = "regulator-fixed";
> + regulator-name = "D1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + hdmi-out {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con: endpoint {
> + remote-endpoint = <&adv7511_out>;
> + };
> + };
> + };
> +
> + lvds-decoder {
> + compatible = "thine,thc63lvd1024";
> + vcc-supply = <&d3_3v>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + thc63lvd1024_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + thc63lvd1024_out: endpoint {
> + remote-endpoint = <&adv7511_in>;
> + };
> + };
> + };
> + };
> +
> + x1_clk: x1-clock {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <148500000>;
> + };
> };
>
> &avb {
> @@ -74,6 +124,13 @@
> };
> };
>
> +&du {
> + clocks = <&cpg CPG_MOD 724>,
> + <&x1_clk>;
> + clock-names = "du.0", "dclkin.0";
> + status = "okay";
> +};
> +
> &extal_clk {
> clock-frequency = <16666666>;
> };
> @@ -102,6 +159,55 @@
> gpio-controller;
> #gpio-cells = <2>;
> };
> +
> + hdmi@39 {
> + compatible = "adi,adv7511w";
> + reg = <0x39>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> + avdd-supply = <&d1_8v>;
> + dvdd-supply = <&d1_8v>;
> + pvdd-supply = <&d1_8v>;
> + bgvdd-supply = <&d1_8v>;
> + dvdd-3v-supply = <&d3_3v>;
> +
> + adi,input-depth = <8>;
> + adi,input-colorspace = "rgb";
> + adi,input-clock = "1x";
> + adi,input-style = <1>;
> + adi,input-justification = "evenly";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + adv7511_in: endpoint {
> + remote-endpoint = <&thc63lvd1024_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + adv7511_out: endpoint {
> + remote-endpoint = <&hdmi_con>;
> + };
> + };
> + };
> + };
> +};
> +
> +&lvds0 {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + lvds0_out: endpoint {
> + remote-endpoint = <&thc63lvd1024_in>;
> + };
> + };
> + };
> };
>
> &mmc0 {
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
> @@ -27,6 +27,63 @@
> /* first 128MB is reserved for secure area. */
> reg = <0 0x48000000 0 0x78000000>;
> };
> +
> + hdmi-out {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con: endpoint {
> + remote-endpoint = <&adv7511_out>;
> + };
> + };
> + };
> +
> + lvds-decoder {
> + compatible = "thine,thc63lvd1024";
> + vcc-supply = <&vcc3v3_d5>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + thc63lvd1024_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + thc63lvd1024_out: endpoint {
> + remote-endpoint = <&adv7511_in>;
> + };
> + };
> + };
> + };
> +
> + vcc1v8_d4: regulator-0 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC1V8_D4";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vcc3v3_d5: regulator-1 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC3V3_D5";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +};
> +
> +&du {
> + status = "okay";
> };
>
> &extal_clk {
> @@ -53,6 +110,64 @@
> };
> };
>
> +&lvds0 {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + lvds0_out: endpoint {
> + remote-endpoint = <&thc63lvd1024_in>;
> + };
> + };
> + };
> +};
> +
> +&i2c0 {
> + pinctrl-0 = <&i2c0_pins>;
> + pinctrl-names = "default";
> +
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + hdmi@39 {
> + compatible = "adi,adv7511w";
> + #sound-dai-cells = <0>;
> + reg = <0x39>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> + avdd-supply = <&vcc1v8_d4>;
> + dvdd-supply = <&vcc1v8_d4>;
> + pvdd-supply = <&vcc1v8_d4>;
> + bgvdd-supply = <&vcc1v8_d4>;
> + dvdd-3v-supply = <&vcc3v3_d5>;
> +
> + adi,input-depth = <8>;
> + adi,input-colorspace = "rgb";
> + adi,input-clock = "1x";
> + adi,input-style = <1>;
> + adi,input-justification = "evenly";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + adv7511_in: endpoint {
> + remote-endpoint = <&thc63lvd1024_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + adv7511_out: endpoint {
> + remote-endpoint = <&hdmi_con>;
> + };
> + };
> + };
> + };
> +};
> +
> &pfc {
> gether_pins: gether {
> groups = "gether_mdio_a", "gether_rgmii",
> @@ -60,6 +175,11 @@
> function = "gether";
> };
>
> + i2c0_pins: i2c0 {
> + groups = "i2c0";
> + function = "i2c0";
> + };
> +
> scif0_pins: scif0 {
> groups = "scif0_data";
> function = "scif0";
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
