Re: [PATCH v4 6/6] dt-bindings: media: rcar-vin: Clarify optional props

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Tuesday, 12 June 2018 18:45:53 EEST Sakari Ailus wrote:
> On Tue, Jun 12, 2018 at 04:26:06PM +0200, Jacopo Mondi wrote:
> > Add a note to the R-Car VIN interface bindings to clarify that all
> > properties listed as generic properties in video-interfaces.txt can
> > be included in port@0 endpoint, but if not explicitly listed in the
> > interface bindings documentation, they do not modify it behaviour.
> > 
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> > 
> >  Documentation/devicetree/bindings/media/rcar_vin.txt | 6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt
> > b/Documentation/devicetree/bindings/media/rcar_vin.txt index
> > 8130849..03544c7 100644
> > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt
> > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
> > @@ -55,6 +55,12 @@ from local SoC CSI-2 receivers (port1) depending on
> > SoC.
> > 
> >        instances that are connected to external pins should have port 0.
> > 
> >        - Optional properties for endpoint nodes of port@0:
> > +
> > +        All properties described in [1] and which apply to the selected
> > +        media bus type could be optionally listed here to better describe
> > +        the current hardware configuration, but only the following ones
> > do
> > +        actually modify the VIN interface behaviour:
> > +
> 
> I don't think this should be needed. You should only have properties that
> describe the hardware configuration in a given system.

I agree. Please list explicitly all properties that are applicable for this 
device, and don't tell which one(s) are used by the driver.

> >          - hsync-active: see [1] for description. Default is active high.
> >          - vsync-active: see [1] for description. Default is active high.
> >          - data-enable-active: polarity of CLKENB signal, see [1] for

-- 
Regards,

Laurent Pinchart



--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux