From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx> Add USB host and device support for BTicino i.MX6DL Mamoj board. Signed-off-by: Simone CIANNI <simone.cianni@xxxxxxxxxx> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@xxxxxxxxxx> Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> Reviewed-by: Fabio Estevam <fabio.estevam@xxxxxxx> --- Changes for v2: - collect Fabio r-w-b tag arch/arm/boot/dts/imx6dl-mamoj.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts index 5034b086035f..a727e1471006 100644 --- a/arch/arm/boot/dts/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -134,6 +134,17 @@ vin-supply = <®_lcd_vgl>; }; + reg_usb_host: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbhost-vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhost>; + regulator-min-microvolt = <50000000>; + regulator-max-microvolt = <50000000>; + gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_wl18xx_vmmc: regulator-wl18xx-vmcc { compatible = "regulator-fixed"; regulator-name = "vwl1807"; @@ -297,6 +308,16 @@ status = "okay"; }; +&usbh1 { + vbus-supply = <®_usb_host>; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -428,6 +449,12 @@ >; }; + pinctrl_usbhost: usbhost { + fsl,pins = < + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069 -- 2.14.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html