On 06 June 2018 22:53, Frank wrote:
> On 06/06/18 14:48, Frank Rowand wrote:
> > On 06/05/18 23:36, Michel Pollet wrote:
> >> Hi Frank,
> >>
> >> On 05 June 2018 18:34, Frank wrote:
> >>> On 06/05/18 04:28, Michel Pollet wrote:
> >>>> The Renesas R9A06G032 second CA7 is parked in a ROM pen at boot
> >>>> time, it requires a special enable method to get it started.
> >>>>
> >>>> Signed-off-by: Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>
> >>>> ---
> >>>> arch/arm/mach-shmobile/Makefile | 1 +
> >>>> arch/arm/mach-shmobile/smp-r9a06g032.c | 79
> >>>> ++++++++++++++++++++++++++++++++++
> >>>> 2 files changed, 80 insertions(+)
> >>>> create mode 100644 arch/arm/mach-shmobile/smp-r9a06g032.c
> >>>>
> >>>> diff --git a/arch/arm/mach-shmobile/Makefile
> >>>> b/arch/arm/mach-shmobile/Makefile index 1939f52..d7fc98f 100644
> >>>> --- a/arch/arm/mach-shmobile/Makefile
> >>>> +++ b/arch/arm/mach-shmobile/Makefile
> >>>> @@ -34,6 +34,7 @@ smp-$(CONFIG_ARCH_SH73A0)+= smp-sh73a0.o
> >>> headsmp-scu.o platsmp-scu.o
> >>>> smp-$(CONFIG_ARCH_R8A7779)+= smp-r8a7779.o headsmp-scu.o
> >>> platsmp-scu.o
> >>>> smp-$(CONFIG_ARCH_R8A7790)+= smp-r8a7790.o
> >>>> smp-$(CONFIG_ARCH_R8A7791)+= smp-r8a7791.o
> >>>> +smp-$(CONFIG_ARCH_R9A06G032)+= smp-r9a06g032.o
> >>>> smp-$(CONFIG_ARCH_EMEV2)+= smp-emev2.o headsmp-scu.o
> >>> platsmp-scu.o
> >>>>
> >>>> # PM objects
> >>>> diff --git a/arch/arm/mach-shmobile/smp-r9a06g032.c
> >>>> b/arch/arm/mach-shmobile/smp-r9a06g032.c
> >>>> new file mode 100644
> >>>> index 0000000..cd40e6e
> >>>> --- /dev/null
> >>>> +++ b/arch/arm/mach-shmobile/smp-r9a06g032.c
> >>>> @@ -0,0 +1,79 @@
> >>>> +// SPDX-License-Identifier: GPL-2.0
> >>>> +/*
> >>>> + * R9A06G032 Second CA7 enabler.
> >>>> + *
> >>>> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> >>>> + *
> >>>> + * Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>,
> >>> <buserror@xxxxxxxxx>
> >>>> + * Derived from action,s500-smp
> >>>> + */
> >>>> +
> >>>> +#include <linux/io.h>
> >>>> +#include <linux/of.h>
> >>>> +#include <linux/of_address.h>
> >>>> +#include <linux/smp.h>
> >>>> +
> >>>> +/*
> >>>> + * The second CPU is parked in ROM at boot time. It requires
> >>>> +waking it after
> >>>> + * writing an address into the BOOTADDR register of sysctrl.
> >>>> + *
> >>>> + * So the default value of the "cpu-release-addr" corresponds to
> >>> BOOTADDR...
> >>>> + *
> >>>> + * *However* the BOOTADDR register is not available when the
> >>>> +kernel
> >>>> + * starts in NONSEC mode.
> >>>> + *
> >>>> + * So for NONSEC mode, the bootloader re-parks the second CPU into
> >>>> +a pen
> >>>> + * in SRAM, and changes the "cpu-release-addr" of linux's DT to a
> >>>> +SRAM address,
> >>>> + * which is not restricted.
> >>>
> >>> The binding document for cpu-release-addr does not have a definition
> >>> for 32 bit arm. The existing definition is only 64 bit arm. Please
> >>> add the definition for 32 bit arm to patch 1.
> >>
> >> Hmmm I do find a definition in
> >> Documentation/devicetree/bindings/arm/cpus.txt -- just under where I
> >> added my 'enable-method' -- And it is already used as 32 bits in at
> >> least arch/arm/boot/dts/stih407-family.dtsi.
> >
> > If the correct answer is for cpu-release-addr to be 64 bits in certain
> > cases (that discussion is ongoing further downthread) then one
> > approach to maintain compatibility _and_ to fix the devicetree source
> > files is to change the source code that currently gets
> > cpu-release-addr as a
> > 32 bit object to check the size of the property and get it as either a
> > 32 bit or 64 bit object, based on the actual size of the property in
> > the device tree and then change the value in the devicetree source
> > files to be two cells. BUT this does not consider the bootloader
> > complication. arch/arm/boot/dts/axm5516-cpus.dtsi has a note "//
> > Fixed by the boot loader", so the boot loader also has to be modified
> > to be able to handle the possibility that the property could be either
> > 32 bits or 64 bits. I don't know how to maintain compatibility with
> > the boot loader since we can't force it to change synchronously with
> > changes in the kernel.
> >
> > You can consider this comment to be a drive-by observation. I think
> > Rob and Geert and people like that are likely to be more helpful with
> > what to actually do, and you can treat my comment more as pointing out
> > the issue than as providing the perfect solution.
>
> Darn it, hit <send> too quickly.
>
> I meant to mention that there are several devicetree source files that have a
> single cell value for cpu-release-addr, and thus potentially face the same
> situation, depending on what the final decision is on the proper size for cpu-
> release-addr. As of v4.17, a git grep shows one cell values in:
>
> arch/arm/boot/dts/axm5516-cpus.dtsi
> arch/arm/boot/dts/stih407-family.dtsi
> arch/arm/boot/dts/stih418.dtsi
Yes, I had grepped before I used 32 bits on mine...
Now, what is the decision here? Our bootloader is already modified to set it to 32 bits, so I propose that
+ I change the driver to handle 32 and 64 bits properties
+ I add this to the cpu.txt, as a separate patch:
# On other systems, the property can be either
32 bits or 64 bits, it is the driver's responsibility
to deal with either sizes.
Michel
>
> -Frank
>
> > -Frnak
> >
> >
> >>
> >> What do you want me to add to this exactly? Do you want me to just
> >> change "required for systems that have an "enable-method" property
> >> value of "spin-table" to also specify renesas,r9a06g032 ?
> >>
> >> Thanks!
> >> Michel
> >>
> >>>
> >>> -Frank
> >>>
> >>>
> >>>> + */
> >>>> +
> >>>> +static void __iomem *cpu_bootaddr;
> >>>> +
> >>>> +static DEFINE_SPINLOCK(cpu_lock);
> >>>> +
> >>>> +static int r9a06g032_smp_boot_secondary(unsigned int cpu, struct
> >>>> +task_struct *idle) { if (!cpu_bootaddr) return -ENODEV;
> >>>> +
> >>>> +spin_lock(&cpu_lock);
> >>>> +
> >>>> +writel(__pa_symbol(secondary_startup), cpu_bootaddr);
> >>>> +arch_send_wakeup_ipi_mask(cpumask_of(cpu));
> >>>> +
> >>>> +spin_unlock(&cpu_lock);
> >>>> +
> >>>> +return 0;
> >>>> +}
> >>>> +
> >>>> +static void __init r9a06g032_smp_prepare_cpus(unsigned int
> >>>> +max_cpus) { struct device_node *dn; int ret;
> >>>> +u32 bootaddr;
> >>>> +
> >>>> +dn = of_get_cpu_node(1, NULL);
> >>>> +if (!dn) {
> >>>> +pr_err("CPU#1: missing device tree node\n"); return; }
> >>>> +/*
> >>>> + * Determine the address from which the CPU is polling.
> >>>> + * The bootloader *does* change this property */ ret =
> >>>> +of_property_read_u32(dn, "cpu-release-addr", &bootaddr);
> >>>> +of_node_put(dn); if (ret) {
> >>>> +pr_err("CPU#1: invalid cpu-release-addr property\n"); return; }
> >>>> +pr_info("CPU#1: cpu-release-addr %08x\n", bootaddr);
> >>>> +
> >>>> +cpu_bootaddr = ioremap(bootaddr, sizeof(bootaddr)); }
> >>>> +
> >>>> +static const struct smp_operations r9a06g032_smp_ops __initconst =
> >>>> +{ .smp_prepare_cpus = r9a06g032_smp_prepare_cpus,
> >>>> +.smp_boot_secondary = r9a06g032_smp_boot_secondary, };
> >>>> +CPU_METHOD_OF_DECLARE(r9a06g032_smp, "renesas,r9a06g032-
> smp",
> >>>> +&r9a06g032_smp_ops);
> >>>>
> >>
> >>
> >>
> >>
> >> Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne
> End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under
> Registered No. 04586709.
> >>
> >
> >
Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
