The powerdomains for corners just pass the performance state set by the
consumers to the RPM (Remote Power manager) which then takes care
of setting the appropriate voltage on the corresponding rails to
meet the performance needs.
We add all powerdomain data needed on msm8996 here. This driver can easily
be extended by adding data for other qualcomm SoCs as well.
Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
.../devicetree/bindings/power/qcom,rpmpd.txt | 55 ++++
drivers/soc/qcom/Kconfig | 9 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/rpmpd.c | 299 ++++++++++++++++++
4 files changed, 364 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt
create mode 100644 drivers/soc/qcom/rpmpd.c
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
new file mode 100644
index 000000000000..68f620a2af0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
@@ -0,0 +1,55 @@
+Qualcomm RPM Powerdomains
+
+* For RPM powerdomains, we communicate a performance state to RPM
+which then translates it into a corresponding voltage on a rail
+
+Required Properties:
+ - compatible: Should be one of the following
+ * qcom,msm8996-rpmpd: RPM Powerdomain for the msm8996 family of SoC
+ - power-domain-cells: number of cells in power domain specifier
+ must be 1.
+ - operating-points-v2: Phandle to the OPP table for the power-domain.
+ Refer to Documentation/devicetree/bindings/power/power_domain.txt
+ and Documentation/devicetree/bindings/opp/qcom-opp.txt for more details
+
+Example:
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8996-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>,
+ <&rpmpd_opp_table>,
+ <&rpmpd_opp_table>,
+ <&rpmpd_opp_table>,
+ <&rpmpd_opp_table>,
+ <&rpmpd_opp_table>,
+ <&rpmpd_opp_table>;
+ };
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2-qcom-level", "operating-points-v2";
+
+ rpmpd_opp1: opp@1 {
+ qcom,level = <1>;
+ };
+
+ rpmpd_opp2: opp@2 {
+ qcom,level = <2>;
+ };
+
+ rpmpd_opp3: opp@3 {
+ qcom,level = <3>;
+ };
+
+ rpmpd_opp4: opp@4 {
+ qcom,level = <4>;
+ };
+
+ rpmpd_opp5: opp@5 {
+ qcom,level = <5>;
+ };
+
+ rpmpd_opp6: opp@6 {
+ qcom,level = <6>;
+ };
+ };
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 9dc02f390ba3..a7a405178967 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -74,6 +74,15 @@ config QCOM_RMTFS_MEM
Say y here if you intend to boot the modem remoteproc.
+config QCOM_RPMPD
+ tristate "Qualcomm RPM Powerdomain driver"
+ depends on MFD_QCOM_RPM && QCOM_SMD_RPM
+ help
+ QCOM RPM powerdomain driver to support powerdomain with
+ performance states. The driver communicates a performance state
+ value to RPM which then translates it into corresponding voltage
+ for the voltage rail.
+
config QCOM_SMEM
tristate "Qualcomm Shared Memory Manager (SMEM)"
depends on ARCH_QCOM
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 19dcf957cb3a..9550c170de93 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
obj-$(CONFIG_QCOM_APR) += apr.o
+obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
new file mode 100644
index 000000000000..df6427d43414
--- /dev/null
+++ b/drivers/soc/qcom/rpmpd.c
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm_domain.h>
+#include <linux/mfd/qcom_rpm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/smd-rpm.h>
+
+#include <dt-bindings/mfd/qcom-rpm.h>
+
+#define domain_to_rpmpd(domain) container_of(domain, struct rpmpd, pd)
+
+/* Resource types */
+#define RPMPD_SMPA 0x61706d73
+#define RPMPD_LDOA 0x616f646c
+
+/* Operation Keys */
+#define KEY_CORNER 0x6e726f63 /* corn */
+#define KEY_ENABLE 0x6e657773 /* swen */
+#define KEY_FLOOR_CORNER 0x636676 /* vfc */
+
+#define DEFINE_RPMPD_CORN_SMPA(_platform, _name, _active, r_id) \
+ static struct rpmpd _platform##_##_active; \
+ static struct rpmpd _platform##_##_name = { \
+ .pd = { .name = #_name, }, \
+ .peer = &_platform##_##_active, \
+ .res_type = RPMPD_SMPA, \
+ .res_id = r_id, \
+ .key = KEY_CORNER, \
+ }; \
+ static struct rpmpd _platform##_##_active = { \
+ .pd = { .name = #_active, }, \
+ .peer = &_platform##_##_name, \
+ .active_only = true, \
+ .res_type = RPMPD_SMPA, \
+ .res_id = r_id, \
+ .key = KEY_CORNER, \
+ }
+
+#define DEFINE_RPMPD_CORN_LDOA(_platform, _name, r_id) \
+ static struct rpmpd _platform##_##_name = { \
+ .pd = { .name = #_name, }, \
+ .res_type = RPMPD_LDOA, \
+ .res_id = r_id, \
+ .key = KEY_CORNER, \
+ }
+
+#define DEFINE_RPMPD_VFC(_platform, _name, r_id, r_type) \
+ static struct rpmpd _platform##_##_name = { \
+ .pd = { .name = #_name, }, \
+ .res_type = r_type, \
+ .res_id = r_id, \
+ .key = KEY_FLOOR_CORNER, \
+ }
+
+#define DEFINE_RPMPD_VFC_SMPA(_platform, _name, r_id) \
+ DEFINE_RPMPD_VFC(_platform, _name, r_id, RPMPD_SMPA)
+
+#define DEFINE_RPMPD_VFC_LDOA(_platform, _name, r_id) \
+ DEFINE_RPMPD_VFC(_platform, _name, r_id, RPMPD_LDOA)
+
+struct rpmpd_req {
+ __le32 key;
+ __le32 nbytes;
+ __le32 value;
+};
+
+struct rpmpd {
+ struct generic_pm_domain pd;
+ struct rpmpd *peer;
+ const bool active_only;
+ unsigned long corner;
+ bool enabled;
+ const char *res_name;
+ const int res_type;
+ const int res_id;
+ struct qcom_smd_rpm *rpm;
+ __le32 key;
+};
+
+struct rpmpd_desc {
+ struct rpmpd **rpmpds;
+ size_t num_pds;
+};
+
+static DEFINE_MUTEX(rpmpd_lock);
+
+/* msm8996 RPM powerdomains */
+DEFINE_RPMPD_CORN_SMPA(msm8996, vddcx, vddcx_ao, 1);
+DEFINE_RPMPD_CORN_SMPA(msm8996, vddmx, vddmx_ao, 2);
+DEFINE_RPMPD_CORN_LDOA(msm8996, vddsscx, 26);
+
+DEFINE_RPMPD_VFC_SMPA(msm8996, vddcx_vfc, 1);
+DEFINE_RPMPD_VFC_LDOA(msm8996, vddsscx_vfc, 26);
+
+static struct rpmpd *msm8996_rpmpds[] = {
+ [0] = &msm8996_vddcx,
+ [1] = &msm8996_vddcx_ao,
+ [2] = &msm8996_vddcx_vfc,
+ [3] = &msm8996_vddmx,
+ [4] = &msm8996_vddmx_ao,
+ [5] = &msm8996_vddsscx,
+ [6] = &msm8996_vddsscx_vfc,
+};
+
+static const struct rpmpd_desc msm8996_desc = {
+ .rpmpds = msm8996_rpmpds,
+ .num_pds = ARRAY_SIZE(msm8996_rpmpds),
+};
+
+static const struct of_device_id rpmpd_match_table[] = {
+ { .compatible = "qcom,msm8996-rpmpd", .data = &msm8996_desc },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rpmpd_match_table);
+
+static int rpmpd_send_enable(struct rpmpd *pd, bool enable)
+{
+ struct rpmpd_req req = {
+ .key = KEY_ENABLE,
+ .nbytes = cpu_to_le32(sizeof(u32)),
+ .value = cpu_to_le32(enable),
+ };
+
+ return qcom_rpm_smd_write(pd->rpm, QCOM_RPM_ACTIVE_STATE, pd->res_type,
+ pd->res_id, &req, sizeof(req));
+}
+
+static int rpmpd_send_corner(struct rpmpd *pd, int state, unsigned int corner)
+{
+ struct rpmpd_req req = {
+ .key = pd->key,
+ .nbytes = cpu_to_le32(sizeof(u32)),
+ .value = cpu_to_le32(corner),
+ };
+
+ return qcom_rpm_smd_write(pd->rpm, state, pd->res_type, pd->res_id,
+ &req, sizeof(req));
+};
+
+static void to_active_sleep(struct rpmpd *pd, unsigned long corner,
+ unsigned long *active, unsigned long *sleep)
+{
+ *active = corner;
+
+ if (pd->active_only)
+ *sleep = 0;
+ else
+ *sleep = *active;
+}
+
+static int rpmpd_aggregate_corner(struct rpmpd *pd)
+{
+ int ret;
+ struct rpmpd *peer = pd->peer;
+ unsigned long active_corner, sleep_corner;
+ unsigned long this_corner = 0, this_sleep_corner = 0;
+ unsigned long peer_corner = 0, peer_sleep_corner = 0;
+
+ to_active_sleep(pd, pd->corner, &this_corner, &this_sleep_corner);
+
+ if (peer && peer->enabled)
+ to_active_sleep(peer, peer->corner, &peer_corner,
+ &peer_sleep_corner);
+
+ active_corner = max(this_corner, peer_corner);
+
+ ret = rpmpd_send_corner(pd, QCOM_RPM_ACTIVE_STATE, active_corner);
+ if (ret)
+ return ret;
+
+ sleep_corner = max(this_sleep_corner, peer_sleep_corner);
+
+ return rpmpd_send_corner(pd, QCOM_RPM_SLEEP_STATE, sleep_corner);
+}
+
+static int rpmpd_power_on(struct generic_pm_domain *domain)
+{
+ int ret;
+ struct rpmpd *pd = domain_to_rpmpd(domain);
+
+ mutex_lock(&rpmpd_lock);
+
+ ret = rpmpd_send_enable(pd, true);
+ if (ret)
+ goto out;
+
+ pd->enabled = true;
+
+ if (pd->corner)
+ ret = rpmpd_aggregate_corner(pd);
+
+out:
+ mutex_unlock(&rpmpd_lock);
+
+ return ret;
+}
+
+static int rpmpd_power_off(struct generic_pm_domain *domain)
+{
+ int ret;
+ struct rpmpd *pd = domain_to_rpmpd(domain);
+
+ mutex_lock(&rpmpd_lock);
+
+ ret = rpmpd_send_enable(pd, false);
+ if (!ret)
+ pd->enabled = false;
+
+ mutex_unlock(&rpmpd_lock);
+
+ return ret;
+}
+
+static int rpmpd_probe(struct platform_device *pdev)
+{
+ int i;
+ size_t num;
+ struct genpd_onecell_data *data;
+ struct qcom_smd_rpm *rpm;
+ struct rpmpd **rpmpds;
+ const struct rpmpd_desc *desc;
+
+ rpm = dev_get_drvdata(pdev->dev.parent);
+ if (!rpm) {
+ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
+ return -ENODEV;
+ }
+
+ desc = of_device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
+
+ rpmpds = desc->rpmpds;
+ num = desc->num_pds;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->domains = devm_kcalloc(&pdev->dev, num, sizeof(*data->domains),
+ GFP_KERNEL);
+ data->num_domains = num;
+
+ for (i = 0; i < num; i++) {
+ if (!rpmpds[i])
+ continue;
+
+ rpmpds[i]->rpm = rpm;
+ rpmpds[i]->pd.power_off = rpmpd_power_off;
+ rpmpds[i]->pd.power_on = rpmpd_power_on;
+ pm_genpd_init(&rpmpds[i]->pd, NULL, true);
+
+ data->domains[i] = &rpmpds[i]->pd;
+ }
+
+ return of_genpd_add_provider_onecell(pdev->dev.of_node, data);
+}
+
+static int rpmpd_remove(struct platform_device *pdev)
+{
+ of_genpd_del_provider(pdev->dev.of_node);
+ return 0;
+}
+
+static struct platform_driver rpmpd_driver = {
+ .driver = {
+ .name = "qcom-rpmpd",
+ .of_match_table = rpmpd_match_table,
+ },
+ .probe = rpmpd_probe,
+ .remove = rpmpd_remove,
+};
+
+static int __init rpmpd_init(void)
+{
+ return platform_driver_register(&rpmpd_driver);
+}
+core_initcall(rpmpd_init);
+
+static void __exit rpmpd_exit(void)
+{
+ platform_driver_unregister(&rpmpd_driver);
+}
+module_exit(rpmpd_exit);
+
+MODULE_DESCRIPTION("Qualcomm RPM Power Domain Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-rpmpd");
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
