On Fri, May 11, 2018 at 10:31 AM, Phil Edworthy <phil.edworthy@xxxxxxxxxxx> wrote: > The DesignWare GPIO IP can be configured for either 1 interrupt or 1 > per GPIO in port A, but the driver currently only supports 1 interrupt. > See the DesignWare DW_apb_gpio Databook description of the > 'GPIO_INTR_IO' parameter. > > This change allows the driver to work with up to 32 interrupts, it will > get as many interrupts as specified in the DT 'interrupts' property. > It doesn't do anything clever with the different interrupts, it just calls > the same handler used for single interrupt hardware. > > Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> > --- > One point to mention is that I have made it possible for users to have > unconnected interrupts by specifying holes in the list of interrupts. This is > done by supporting the interrupts-extended DT prop. > However, I have no use for this and had to hack some test case for this. > Perhaps the driver should support 1 interrupt or all GPIOa as interrupts? > > v6: > - Treat DT and ACPI the same as much as possible. Note that we can't use > platform_get_irq() to get the DT interrupts as they are in the port > sub-node and hence do not have an associated platform device. I already applied this patch in some version, can you check what is in my devel branch and send incremental patches on top if something needs changing? https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git/commit/?h=devel&id=e6ca26abd37606ba4864f20c85d3fe4a2173b93f Sorry for not knowing by heart what was applied or when, it's just too much for me sometimes. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
