From: Fabio Estevam <fabio.estevam@xxxxxxx>
Currently the 'big-endian' property is listed as required, which is
not correct. i.MX SoCs do not need such property, so move it under
'Optional properties' entry instead.
Also, fsl-sai.txt incorrectly referenced 'FTM_PWM registers', so
change it to 'SAI registers', which is the intended description.
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
---
Documentation/devicetree/bindings/sound/fsl,asrc.txt | 10 ++++++----
Documentation/devicetree/bindings/sound/fsl,esai.txt | 2 ++
Documentation/devicetree/bindings/sound/fsl,spdif.txt | 2 ++
Documentation/devicetree/bindings/sound/fsl-sai.txt | 8 +++++---
4 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
index f5a1411..1d4d9f9 100644
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
@@ -31,14 +31,16 @@ Required properties:
it. This property is optional depending on the SoC
design.
- - big-endian : If this property is absent, the little endian mode
- will be in use as default. Otherwise, the big endian
- mode will be in use for all the device registers.
-
- fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends.
- fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends.
+Optional properties:
+
+ - big-endian : If this property is absent, the little endian mode
+ will be in use as default. Otherwise, the big endian
+ mode will be in use for all the device registers.
+
Example:
asrc: asrc@2034000 {
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
index cacd18b..5b99143 100644
--- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -42,6 +42,8 @@ Required properties:
means all the settings for Receiving would be
duplicated from Transmition related registers.
+Optional properties:
+
- big-endian : If this property is absent, the native endian mode
will be in use as default, or the big endian mode
will be in use for all the device registers.
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index 38cfa75..8b324f8 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -33,6 +33,8 @@ Required properties:
it. This property is optional depending on the SoC
design.
+Optional properties:
+
- big-endian : If this property is absent, the native endian mode
will be in use as default, or the big endian mode
will be in use for all the device registers.
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
index 740b467..dd9e597 100644
--- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
@@ -28,9 +28,6 @@ Required properties:
pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
for details of the property values.
- - big-endian : Boolean property, required if all the FTM_PWM
- registers are big-endian rather than little-endian.
-
- lsb-first : Configures whether the LSB or the MSB is transmitted
first for the fifo data. If this property is absent,
the MSB is transmitted first as default, or the LSB
@@ -48,6 +45,11 @@ Required properties:
receive data by following their own bit clocks and
frame sync clocks separately.
+Optional properties:
+
+ - big-endian : Boolean property, required if all the SAI
+ registers are big-endian rather than little-endian.
+
Optional properties (for mx6ul):
- fsl,sai-mclk-direction-output: This is a boolean property. If present,
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
