Update fsl-fec.txt to add 'clocks' and 'clock-names' properties. Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx> --- Changes since v1: - Leave compatible change out, which should probably be addressed by another patch - Move clock properties into 'Optional properties:' section Documentation/devicetree/bindings/net/fsl-fec.txt | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 845ff84..468736d 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -16,6 +16,15 @@ Optional properties: will have the duration be 1 millisecond. Numbers greater than 1000 are invalid and 1 millisecond will be used instead. - phy-supply: regulator that powers the Ethernet PHY. +- clocks: the clocks feeding the FEC controller and phy. + - "ipg": the peripheral access clock + - "ahb": the bus clock for MAC + - "ptp": the sampling clock for PTP (IEEE 1588). On SoC like i.MX6Q, + the clock could come from either the internal clock control module + or external oscillator via pad depending on board design. + - "enet_out": the phy reference clock provided by SoC via pad, which + is available on SoC like i.MX28. +- clock-names: Must contain the clock names described just above Example: -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
