On 05/10/2018 03:01 PM, argus.lin@xxxxxxxxxxxx wrote:
> From: Argus Lin <argus.lin@xxxxxxxxxxxx>
>
> mt6797 is a highly integrated SoCs, it uses mt6351 for power management.
> We need to add pwrap driver to access mt6351. Pwrap of mt6797 support
> dynamic priority meichanism, sequence monitor and starvation mechanism
> to make transaction more reliable.
>
This is drivers differs vastly from V4, but I can't find any explanation why.
Can you please elaborate. For the record the explanation should have been done
in the cover letter.
Thanks,
Matthias
> ---
> drivers/soc/mediatek/mtk-pmic-wrap.c | 50 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
> index 9a01e30..d03e2d4 100644
> --- a/drivers/soc/mediatek/mtk-pmic-wrap.c
> +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
> @@ -366,6 +366,39 @@ enum pwrap_regs {
> [PWRAP_ADC_RDATA_ADDR2] = 0x154,
> };
>
> +static int mt6797_regs[] = {
> + [PWRAP_MUX_SEL] = 0x0,
> + [PWRAP_WRAP_EN] = 0x4,
> + [PWRAP_DIO_EN] = 0x8,
> + [PWRAP_SIDLY] = 0xC,
> + [PWRAP_RDDMY] = 0x10,
> + [PWRAP_CSHEXT_WRITE] = 0x18,
> + [PWRAP_CSHEXT_READ] = 0x1C,
> + [PWRAP_CSLEXT_START] = 0x20,
> + [PWRAP_CSLEXT_END] = 0x24,
> + [PWRAP_STAUPD_PRD] = 0x28,
> + [PWRAP_HARB_HPRIO] = 0x50,
> + [PWRAP_HIPRIO_ARB_EN] = 0x54,
> + [PWRAP_MAN_EN] = 0x60,
> + [PWRAP_MAN_CMD] = 0x64,
> + [PWRAP_WACS0_EN] = 0x70,
> + [PWRAP_WACS1_EN] = 0x84,
> + [PWRAP_WACS2_EN] = 0x98,
> + [PWRAP_INIT_DONE2] = 0x9C,
> + [PWRAP_WACS2_CMD] = 0xA0,
> + [PWRAP_WACS2_RDATA] = 0xA4,
> + [PWRAP_WACS2_VLDCLR] = 0xA8,
> + [PWRAP_INT_EN] = 0xC0,
> + [PWRAP_INT_FLG_RAW] = 0xC4,
> + [PWRAP_INT_FLG] = 0xC8,
> + [PWRAP_INT_CLR] = 0xCC,
> + [PWRAP_TIMER_EN] = 0xF4,
> + [PWRAP_WDT_UNIT] = 0xFC,
> + [PWRAP_WDT_SRC_EN] = 0x100,
> + [PWRAP_DCM_EN] = 0x1CC,
> + [PWRAP_DCM_DBC_PRD] = 0x1D4,
> +};
> +
> static int mt7622_regs[] = {
> [PWRAP_MUX_SEL] = 0x0,
> [PWRAP_WRAP_EN] = 0x4,
> @@ -641,6 +674,7 @@ enum pmic_type {
>
> enum pwrap_type {
> PWRAP_MT2701,
> + PWRAP_MT6797,
> PWRAP_MT7622,
> PWRAP_MT8135,
> PWRAP_MT8173,
> @@ -1067,6 +1101,7 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
> pwrap_writel(wrp, 1, PWRAP_CIPHER_START);
> break;
> case PWRAP_MT2701:
> + case PWRAP_MT6797:
> case PWRAP_MT8173:
> pwrap_writel(wrp, 1, PWRAP_CIPHER_EN);
> break;
> @@ -1396,6 +1431,18 @@ static irqreturn_t pwrap_interrupt(int irqno, void *dev_id)
> .init_soc_specific = pwrap_mt2701_init_soc_specific,
> };
>
> +static const struct pmic_wrapper_type pwrap_mt6797 = {
> + .regs = mt6797_regs,
> + .type = PWRAP_MT6797,
> + .arb_en_all = 0x01fff,
> + .int_en_all = 0xffffffc6,
> + .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
> + .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
> + .has_bridge = 0,
> + .init_reg_clock = pwrap_common_init_reg_clock,
> + .init_soc_specific = NULL,
> +};
> +
> static const struct pmic_wrapper_type pwrap_mt7622 = {
> .regs = mt7622_regs,
> .type = PWRAP_MT7622,
> @@ -1437,6 +1484,9 @@ static irqreturn_t pwrap_interrupt(int irqno, void *dev_id)
> .compatible = "mediatek,mt2701-pwrap",
> .data = &pwrap_mt2701,
> }, {
> + .compatible = "mediatek,mt6797-pwrap",
> + .data = &pwrap_mt6797,
> + }, {
> .compatible = "mediatek,mt7622-pwrap",
> .data = &pwrap_mt7622,
> }, {
> --
> 1.8.1.1.dirty
>
> ************* Email Confidentiality Notice
> ********************
> The information contained in this e-mail message (including any
> attachments) may be confidential, proprietary, privileged, or otherwise
> exempt from disclosure under applicable laws. It is intended to be
> conveyed only to the designated recipient(s). Any use, dissemination,
> distribution, printing, retaining or copying of this e-mail (including its
> attachments) by unintended recipient(s) is strictly prohibited and may
> be unlawful. If you are not an intended recipient of this e-mail, or believe
>
> that you have received this e-mail in error, please notify the sender
> immediately (by replying to this e-mail), delete any and all copies of
> this e-mail (including any attachments) from your system, and do not
> disclose the content of this e-mail to any other person. Thank
> you!
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
