From: Fabio Estevam <fabio.estevam@xxxxxxx>
Currently the following DTC warning is seen with W=1:
arch/arm/boot/dts/imx51-babbage.dtb: Warning (unique_unit_address): /usbphy/usbphy@0: duplicate unit-address (also used in node /usbphy/usbh1phy@0)
Fix it by moving the USB PHY node outside of simple-bus and drop the
unneeded unit-address.
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
---
arch/arm/boot/dts/imx51-babbage.dts | 21 +++++++--------------
1 file changed, 7 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index b8ca73d..de46906 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -170,20 +170,13 @@
mux-ext-port = <3>;
};
- usbphy {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "simple-bus";
-
- usbh1phy: usbh1phy@0 {
- compatible = "usb-nop-xceiv";
- reg = <0>;
- clocks = <&clk_usb>;
- clock-names = "main_clk";
- reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
- vcc-supply = <&vusb_reg>;
- #phy-cells = <0>;
- };
+ usbh1phy: usbphy1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clk_usb>;
+ clock-names = "main_clk";
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vusb_reg>;
+ #phy-cells = <0>;
};
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
