On Tue, May 8, 2018 at 2:53 AM, Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
> For platforms that has multiple copies of the TSENS hardware block it's
> necessary to be able to specify the number of sensors per block in DeviceTree.
I assume you want to replace the hardcoded num_sensors values in the
tsens-xxxx.c files with values in device tree atleast on platforms
that use devicetree?
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> .../devicetree/bindings/thermal/qcom-tsens.txt | 1 +
> drivers/thermal/qcom/tsens.c | 12 +++++++++---
> 2 files changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 292ed89d900b..06195e8f35e2 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -8,6 +8,7 @@ Required properties:
>
> - reg: Address range of the thermal registers
> - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> +- #qcom,sensors: Number of sensors in tsens block
> - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
> nvmem cells
>
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 3f9fe6aa51cc..20f3b87d7667 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -116,6 +116,7 @@ static int tsens_probe(struct platform_device *pdev)
> struct tsens_device *tmdev;
> const struct tsens_data *data;
> const struct of_device_id *id;
> + u32 num_sensors;
>
> if (pdev->dev.of_node)
> dev = &pdev->dev;
> @@ -130,18 +131,23 @@ static int tsens_probe(struct platform_device *pdev)
> else
> data = &data_8960;
>
> - if (data->num_sensors <= 0) {
> + num_sensors = data->num_sensors;
> +
> + if (np)
> + of_property_read_u32(np, "#qcom,sensors", &num_sensors);
> +
> + if (num_sensors <= 0) {
> dev_err(dev, "invalid number of sensors\n");
> return -EINVAL;
> }
>
> tmdev = devm_kzalloc(dev, sizeof(*tmdev) +
> - data->num_sensors * sizeof(*s), GFP_KERNEL);
> + num_sensors * sizeof(*s), GFP_KERNEL);
> if (!tmdev)
> return -ENOMEM;
>
> tmdev->dev = dev;
> - tmdev->num_sensors = data->num_sensors;
> + tmdev->num_sensors = num_sensors;
> tmdev->ops = data->ops;
> for (i = 0; i < tmdev->num_sensors; i++) {
> if (data->hw_ids)
> --
> 2.17.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
