For platforms that has multiple copies of the TSENS hardware block it's
necessary to be able to specify the number of sensors per block in DeviceTree.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
.../devicetree/bindings/thermal/qcom-tsens.txt | 1 +
drivers/thermal/qcom/tsens.c | 12 +++++++++---
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 292ed89d900b..06195e8f35e2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -8,6 +8,7 @@ Required properties:
- reg: Address range of the thermal registers
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+- #qcom,sensors: Number of sensors in tsens block
- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
nvmem cells
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 3f9fe6aa51cc..20f3b87d7667 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -116,6 +116,7 @@ static int tsens_probe(struct platform_device *pdev)
struct tsens_device *tmdev;
const struct tsens_data *data;
const struct of_device_id *id;
+ u32 num_sensors;
if (pdev->dev.of_node)
dev = &pdev->dev;
@@ -130,18 +131,23 @@ static int tsens_probe(struct platform_device *pdev)
else
data = &data_8960;
- if (data->num_sensors <= 0) {
+ num_sensors = data->num_sensors;
+
+ if (np)
+ of_property_read_u32(np, "#qcom,sensors", &num_sensors);
+
+ if (num_sensors <= 0) {
dev_err(dev, "invalid number of sensors\n");
return -EINVAL;
}
tmdev = devm_kzalloc(dev, sizeof(*tmdev) +
- data->num_sensors * sizeof(*s), GFP_KERNEL);
+ num_sensors * sizeof(*s), GFP_KERNEL);
if (!tmdev)
return -ENOMEM;
tmdev->dev = dev;
- tmdev->num_sensors = data->num_sensors;
+ tmdev->num_sensors = num_sensors;
tmdev->ops = data->ops;
for (i = 0; i < tmdev->num_sensors; i++) {
if (data->hw_ids)
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
