From: Fabio Estevam <fabio.estevam@xxxxxxx>
The 'reg' property must match the unit address, so fix them
to avoid the following DTC warnings with W=1:
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (graph_port): /replicator/ports/port@2: graph node unit address error, expected "0"
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (graph_port): /soc/funnel@30041000/ports/port@2: graph node unit address error, expected "0"
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (graph_port): /soc/funnel@30083000/ports/port@2: graph node unit address error, expected "0"
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (graph_port): /soc/etf@30084000/ports/port@1: graph node unit address error, expected "0"
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
---
Hi Rob,
Is this the correct way to fix these warnings?
arch/arm/boot/dts/imx7s.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 7d33993..55b6241 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -126,7 +126,7 @@
/* replicator input port */
port@2 {
- reg = <0>;
+ reg = <2>;
replicator_in_port0: endpoint {
slave-mode;
remote-endpoint = <&etf_out_port>;
@@ -183,7 +183,7 @@
/* funnel output port */
port@2 {
- reg = <0>;
+ reg = <2>;
ca_funnel_out_port0: endpoint {
remote-endpoint = <&hugo_funnel_in_port0>;
};
@@ -234,7 +234,7 @@
};
port@2 {
- reg = <0>;
+ reg = <2>;
hugo_funnel_out_port0: endpoint {
remote-endpoint = <&etf_in_port>;
};
@@ -263,7 +263,7 @@
};
port@1 {
- reg = <0>;
+ reg = <1>;
etf_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
