Document the devicetree bindings for NXP Layerscape qDMA controller
which could be found on NXP QorIQ Layerscape SoCs.
Signed-off-by: Wen He <wen.he_1@xxxxxxx>
---
change in v4:
- Rewrite the bindings document that follows generic DMA bindings file
change in v3:
- no change
change in v2:
- Remove indentation
- Add "Should be" before 'fsl,ls1021a-qdma'
- Replace 'channels' by 'dma-channels'
- Replace 'qdma@8390000' by 'dma-controller@8390000'
Documentation/devicetree/bindings/dma/fsl-qdma.txt | 41 ++++++++++++++++++++
1 files changed, 41 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.txt
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
new file mode 100644
index 0000000..368c4e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
@@ -0,0 +1,41 @@
+NXP Layerscape SoC qDMA Controller
+==================================
+
+This device follows the generic DMA bindings defined in dma/dma.txt.
+
+Required properties:
+
+- compatible: Must be one of
+ "fsl,ls1021a-qdma": for LS1021A Board
+ "fsl,ls1043a-qdma": for ls1043A Board
+ "fsl,ls1046a-qdma": for ls1046A Board
+- reg: Should contain the register's base address and length.
+- interrupts: Should contain a reference to the interrupt used by this
+ device.
+- interrupt-names: Should contain interrupt names:
+ "qdma-error": the error interrupt
+ "qdma-queue": the queue interrupt
+- queues: Should contain number of queues supported.
+
+Optional properties:
+
+- dma-channels: Number of DMA channels supported by the controller.
+- big-endian: If present registers and hardware scatter/gather descriptors
+ of the qDMA are implemented in big endian mode, otherwise in little
+ mode.
+
+Examples:
+
+ qdma: dma-controller@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x0 0x8398000 0x0 0x2000 /* Controller registers */
+ 0x0 0x839a000 0x0 0x2000>; /* Block registers */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error", "qdma-queue";
+ dma-channels = <8>;
+ queues = <2>;
+ big-endian;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
